Our Products
Backward Curved Medium Pressure Explosion Protection Boiler Fan
Backward Curved Medium Pressure Explosion Protection Boiler Fan Introduction This series fans not only provide high efficiency and energy saving equipment for cement industry, but also the better equipment for other industrial furnaces. The product has advanced design, compact structure, easy to remove the maintenance, safe and reliable operation, wear resistance, high temperature resistant, high efficiency, low noise, smooth performance curve, wider range of flow control,
Q235 High Pressure Backward Curved Boiler Fan Calcining Kilns
Q235 High Pressure Backward Curved Boiler Fan Calcining Kilns Introduction This series of fan is suitable for conveying non-corrosive, non-spontaneous combustion, temperature does not exceed 700℃ high temperature gas, dust and hard particles contained in the medium is not more than 150mg/m3. Detail introduction There are 12 forward bending blades on the impeller. After the impeller is formed, the dynamic and static balance and overspeed test are carried out to ensure the
Carbon Steel High Wear Resistance Power Plant Fan High Volume
Carbon Steel High Wear Resistance Power Plant Fan High Volume Introduction This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering the fan. Detail introduction The fan system running at normal temperature with an impeller diameter
Q235 Single Inlet Cement Fan High Volume Backward Energy Saving
Q235 Single Inlet Cement Fan High Volume Backward Energy Saving Introduction The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the gas, and the dust and hard particles contained in the gas are not more than 150 mg/m3. Detail introduction It can also be made into explosion-proof and flame
16Mn V-Belt Driven Cement Fan Abrasion Resistant Building Ventilation
16Mn V-Belt Driven Cement Fan Abrasion Resistant Building Ventilation Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. The impeller is annealed to eliminate the internal stress generated during welding,
Medium Pressure Power Plant Fan Efficient Energy Saving Anti Abrasive
Medium Pressure Power Plant Fan Efficient Energy-Saving Anti Abrasive Introduction The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. The impeller is subjected to a high standard of dynamic balancing adjusting to ensure stable operation of the fan. It has the characteristics of not easy dust accumulation and wear resistant, high efficiency and low noise. This series is a
16Mn High Temperature Material Handling Blower Anti Explosion
16Mn High Temperature Material Handling Blower Anti-Explosion Introduction 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. Bearing cooling method: according to gas temperature and operating environment conditions choose low-cost water-cooling method or oil-cooling method with good heat dissipation performance. For extremely high temperature
Q345 High Pressure Material Handling Blower Energy Efficiency
Q345 High Pressure Material Handling Blower Energy Efficiency Introduction The 9-11 series fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. It has been compared with similar foreign products and tested by model test. Detail introduction 1. The fan can output very high pressure, suitable for any need to transport high pressure & normal
Single Inlet Forward Material Handling Blower Explosionproof
Single Inlet Forward Material Handling Blower Explosionproof Introduction The 9-08 series fan has a large flow rate and moderate pressure. It’s suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. Detail introduction 1. The fan can output very high pressure, suitable for any need to transport high pressure & normal temperature gas
Carbon Steel Double Suction Material Handling Blower Backward Curved
Carbon Steel Double Suction Material Handling Blower Backward Curved Introduction The 9-11 series fan has a large flow rate and moderate pressure. It is capable of outputting higher gas pressures and providing more gas flow with lower noise. When the airflow resistance is increased, the motor load will be automatically reduced and the motor will not be burnt. Detail introduction 1. It’s a high-performance product promoted by the State Economic Commission and the Ministry of
SUS 26400M3/H Cement Kiln Blower Fan V-Belt Driven Medium Pressure
Stainless Steel V-Belt Driven Medium Pressure Cement Kiln Blower Fan Introduction The 6-06.series boiler fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The medium transported by the forced draft fan is air,
Single Inlet Stainless Steel Blower Fan High Air Flow Lime Kiln
Single Inlet High Air Flow Lime Kiln Stainless Steel Blower Fan Introduction Of Centrifugal Fan The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. Mainly circulating fluidized bed system, smoke exhaust, material
Smoke Centrifugal Ventilation Fans High Temperature Centrifugal Blower Fan
Materials Drying Smoke Exhaust Carbon Steel Mine Ventilate Centrifugal Blower Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the “sanitary standards for industrial enterprises”, and can also be used in various occasions with the same functional requirements. The 5-12 series centrifuga
Industrial Power Plant Fan Backward Double Inlet Centrifugal Fan
Double Inlet Backward Industrial Exhaust Fan Price Power Plant Fan Introduction The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. The main shaft of the transmission part is made of high-quality steel, and the 5-51 series of fans are all made of roller bearings. Product Advantages 1.It can output higher outlet
Carbon Steel Coupling Driving Antifraying Heat Dissipation Flue Gas Centrifugal Fan
Carbon Steel Coupling Driving Antifraying Heat Dissipation Flue Gas Centrifugal Fan Introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler,
Q235 Single Suction High Air Flow High Pressure Centrifugal Fan
Q235 Single Suction High Air Flow High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-08 series high static pressure blower is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. It can not only reduce the pollution of the smoke on the environment, but also reduce the wear of the smoke on the fan, which is
75KW Heavy Duty Industrial Anti Explosion High Pressure Centrifugal Fan
75KW Heavy Duty Industrial Anti-Explosion High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-10 series high pressure radial blower is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. In the case of using the common base , the installation is very simple and basically does not require the support of professional technicians. The parts are closely matched and have good sealing performance to
China AC Motor Long Life Smoke Exhaust High Pressure Centrifugal Fan
China AC Motor Long Life Smoke Exhaust High Pressure Centrifugal Fan Introduction Of Centrifugal Fan 9-03 series fan-type iron furnace special high pressure industrial air blower, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The bearing box is reserved with the temperature and vibration sensor installation position, which can conveniently install the fan operation monitoring device. Technical data series model
