Forced Draft Of Industrial Kilns Abrasion Resistant V-Belt Driven Induced Fan Introduction The 4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. Forced Draft Of Industrial Kilns Abrasion Resistant V-Belt Driven Induced Fan can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow

Harmful Air Emissions Industrial Boiler Exhaust Induced Draft Centrifugal Fan Introduction Harmful Air Emissions Industrial Boiler Exhaust Induced Draft Centrifugal Fan is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3. The fan can also be used in cement kiln decomposition process, steel smelting

Forced Ventilating Air Filtration System Induced Draught Exhaust Blower Fan Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. In the coal-fired boiler system, the ventilation and induce draft systems of various boilers with evaporation capacity of 20 tons/hour to 800 tons/hour can be configured.

Heat Dissipation Efficient Energy-Saving Induced Draft Centrifugal Blower Fan Introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Centrifugal fan is applied in

Industrial Boiler Forced Induced Draft Building Ventilation Blower Fan Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and induced draft fans with the low

Energy Efficiency Single Inlet Kilns Cooling Induced Draft Fan Introduction The 7-07 series high-pressure centrifugal fan has a high output pressure, can transport normal temperature or high temperature various gases and various forms of materials, and also can be used in harsh working environments. Such as conveying high temperature/harmful/dangerous gas, hard particles, powder, debris, fiber, forced ventilation, industrial dust collectors, air filtration systems, flue gas

Industrial Boiler Induced Draft Antiwear Long Life Blower Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials.

Metallurgy Induced Draught Calcining Kilns Snail Fan Blower Introduction: The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Metallurgy Induced

Long Lifetime Backward Anticorrosion Induced Draft Centrifugal Fan Introduction The 7-07 series high-pressure centrifugal fan has a high output pressure, can transport normal temperature or high temperature various gases and various forms of materials, and also can be used in harsh working environments. Such as conveying high temperature/harmful/dangerous gas, hard particles, powder, debris, fiber, forced ventilation, industrial dust collectors, air filtration systems, flue

Energy Efficiency Anti Abrasive Foundry Furnace Induced Draft Centrifugal Fan Introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Technical data series model

Stainless Steel Single Suction CFB Boiler Induced Draft Blower Fan Introduction At present, there are many series of boilers, and the situation of burning coal quality is quite different, after installing dust removal equipment and waste heat utilization equipment, insufficient pumping force affects normal operation. In order to overcome the insufficient pumping force due to the above reasons, the furnace has a positive pressure, which affects the combustion and normal

HG785 Alloyed Steel Coupling Driven Heat Dissipation Induced Draft Fan Introduction The 7-10 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 87%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Technical

Industrial Forward Harmful Air Emissions Induced Draft Centrifugal Fan Introduction The 7-08.26 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields.

High Pressure Coupling Driving Corrosion Resistant Induced Draft Centrifugal Fan Introduction The series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 88.3%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields.

Medium Pressure Single Inlet Brick Kiln Induced Draft Centrifugal Fan Introduction 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. The output gas flow is slightly larger than the 6-11 series heavy-duty centrifugal fan, the air volume is large, and the pressure is high, smooth operation, high reliability and long life. It is widely used in industrial

Q235 Heavy Duty High Wear Resistance Metallurgy Induced Draft Centrifugal Fan Introduction 1. Made of high quality carbon steel, stainless steel or other metal materials are available upon request. 2. Ultrasonic flaw detection on the welding seam and main spindle of the impeller to ensure that there are no welding defects or material defects and ensure the strength. 3. Bearing cooling method: according to gas temperature and operating environment conditions choose low-cost