Circulating fluidized bed boiler fan Application of Y9-38 centrifugal induced draft Fan Model Y9-38 boiler centrifugal fan is designed for industrial boilers (0.5 ~ 35t/h) which are equipped with smoke and dust removal devices and burning various coal qualities. Where the intake conditions are the same and the performance is suitable, can be selected, but the maximum temperature shall not exceed 250℃. In front of the induced draft fan, the dust removal device must be added to

5-55-12.5C high temperature centrifugal fan Y5-55 boiler centrifugal induced draft fan product overview The centrifugal induced draft fan of Y5-55 boiler is designed for the industrial boiler (1 ~ 20T/h) which is equipped with smoke removal device and burning all kinds of coal. The maximum temperature shall not exceed 250℃ if the air intake condition is the same and the performance is suitable. Before the induced draft fan, the dust removal device with an efficiency of not

High temperature high dust blower for Cement plant kiln exhaust blower High Temperature Blower Fan Temperature and dust are two challenges for this application, operation temperature may reach 500 degree C, Delivery capacity up to 700,000Nm3/hr with installed motor up to 4,500kW, the impeller diameter can reach 3.5m; model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m³/h) Power (kW) 8C 1450 1859～2745 11000～26400 15 ~ 22 9C 1450 2353～3474 15700～37500 30 ~ 45 10C

Coupling Driving Blowers with High CFM, centrifugal fan Performance:Coupling Driving Power Plant Blowers with High CFM Working Temperature:< 500 degree Air composition: Clean air, Dusty air, Corrosive gas, Combustible gas Dust composition: Powder materials, Light particle materials, etc. Impeller diameter: 300~3000 mm Speed of mainshaft: 960~2900 rpm Pressure range: 705~25425 Pa Flow range: 3297~93305 m3/h Power: 1.1 kw~1000 kw Drive model: Direct drive, belt drive, coupling

ID fan for power plant up to 200MW urea fertilizer ID PA FD fan and FGD boost fan In energy sector we can provide blower and fan for both trandition and renewable energy generation. In a tradition power plant or captive power plant, we provide - Primary air fan (PA Fan); - Forced draught fan (FD Fan); - Induced draught fan (ID Fan); - FGD boost fan; Our blower and fan have been widely applied for the boilers with a capacity from 50 to 2000 t/h or power plant up to 600MW a

4-72 Ducted Centrifugal, 4-72 High-Temperature Resistant Fan Blowers Product description 4-72 Ducted Centrifugal, 4-72 High-Temperature Resistant Fan Blowers Use The 4-72 centrifugal fan can be used for indoor ventilation in general factories and large buildings, conveying air and other gases that are not spontaneously combust, are harmless to the human body, and are non-corrosive to copper.The model 4-72 centrifugal ventilator can be used for indoor ventilation in general

Alloy Steel AC Motor Industrial Centrifugal Fans Explosion Protection Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. Typical applications include combustion air, pressure and vacuum drying,

Carbon Steel Kilns Cooling Industrial Centrifugal Fans Energy Saving Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. The fan adopts thick steel structure and non-overload impeller design, which is

16Mn Heavy Duty Industrial Centrifugal Fans Air Filtration System Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. The fan is used in high pressure applications to transport relatively clean gas.

Stainless Steel Heavy Duty Industrial Centrifugal Fans Coal Mill Introduction The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. The wheel has a stable, smooth air performance curve which can efficiently avoid performance drop caused by the deviation of the working point. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air

HG785 Alloyed Steel Industrial Industrial Centrifugal Fans Drying Introduction The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. All steel laser cut blades are welded and positioned accurately. The overall strength of the blades are designed and welded to withstand long hours high speed operation. Technical data series model Rotation Speed (r/min)

16Mn AC Motor Industrial Centrifugal Fans Heat Dissipation Long Life Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. The new shaft and coupling technology ensuring the accuracy during the assembly process while maintaining high reliability. All our machines underwent

Q345 Coupling Driven Antiwear Industrial Centrifugal Fans Drying Introduction 4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants.It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the

16Mn Single Suction High Volume Industrial Centrifugal Fans Materials Drying Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. Made of high quality carbon steel, Stainless steel or other metal materials can also be used according to user requirements. Detail introduction The impeller is annealed to completely eliminate structural stresses generated

Carbon Steel V-Belt Driving Long Life Industrial Centrifugal Fans Furnace Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. The fan speed can be flexibly set by matching different pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. The bearing housing uses a labyrinth mechanical seal, a unique Leak proof oil design inside, a vent hole at the top, and a sealant on

Q235 Coupling Driven Materials Drying Industrial Centrifugal Fans Introduction Of Centrifugal Fan The 6-06 series boiler fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. It’s a widely used medium-pressure heavy-duty centrifugal fan, which is commonly used in industrial systems such as boilers, dust collectors,

Q345 V-Belt Driving Heat Dissipation Industrial Centrifugal Fans Introduction Of Centrifugal Fan The 6-06 series boiler fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. It’s a widely used medium-pressure heavy-duty centrifugal fan, which is commonly used in industrial systems such as boilers, dust collectors,

Large Capacity Aluminium Alloyed Drying Industrial Centrifugal Fans Introduction Of Centrifugal Fan Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. This series of fans is a new type of high efficiency industrial fan in the field of small flow and medium pressure. Technical data series