"high temperature air blower"

Explosion Proof Gas Burner For Furnace 3 Phase Motor Radial Blower Fan Introduction The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. Suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous

Heavy Duty V-Belt Driven Cooling Induced Draft Fan Centrifugal Blower Introduction Of Centrifugal Fan This series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation

Long Life Energy Efficiency Single Inlet Dust Collector Fan Detail introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. Customized design according to

Aluminium Alloyed Energy Saving Radial Blower Dust Collector Fan Detail introduction 1.The fan pressure is high, therefore it is especially suitable for 1-20t/h industrial boilers, which equipped with spiral pipes and multi-tube dust collector. 2.The fan has high efficiency, high total pressure, low noise, flat performance curve, wide economical use area, and adopts backward plate type blades. The efficiency of the fan at the best working point is 86.5%, and the noise index(

Cement plant kiln exhaust blower fan Introduction Of exhaust blower fan The kiln head exhaust fan provides negative pressure for the kiln head dust collector and discharges the dedusted kiln head exhaust gas into the atmosphere. The working temperature of the fan is 180-250C, and the dust content is less than 50mg/Nm. The fan adopts a high-efficiency, low-noise, low-noise, and large-flow model. The impeller is an arc-shaped disc with single-plate backward blades, which has

heavy duty exhaust fan Introduction Of heavy duty exhaust fan The heavy-duty fan series are used in the industrial field, and the typical applications include cement/lime/nickel-iron/ceramic sand rotary kiln system, large-scale industrial dust removal system, sintering machine system, large-scale industrial boiler system, industrial mill system, etc. 01. Fan parameters Flow: 500-1400000m/h; Pressure: 500-200000pa; Temperature: 20-600C The heavy-duty centrifugal fan has the

Introduction Desulfurization fans are suitable for ventilation and induced draft fan systems of desulfurization towers in thermal power plants. When there are no other special requirements, 6-41 can also be used for mine ventilation and general ventilation. The medium transported by the ventilator is air, the temperature does not exceed 80oC, and the medium transported by the induced draft fan is flue gas. A dust removal device must be installed in front of the induced draft

Industrial Long Life Blast Furnace Boiler Fan Explosion Proofing Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the sanitary standards for industrial enterprises, and can also be used in various occasions with the same functional requirements. The 5-12 series centrifugal fan is an

Product Description: The 9-10.19 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating fluidized bed system, air purification and industrial waste gas