"stainless steel blower"

Stainless Steel Single Inlet Energy Saving Induced Draft Fan Introduction: The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the gas,

Industrial Boiler Waste Gas Desulfurization Heavy Duty Centrifugal Fan Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 C, the V-belt driving type fan can transport media below 150 C for a long

HG785 Alloyed Steel Single Suction Ventilation Centrifugal Flow Fan Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above

Carbon Steel Industrial Forward Exhaust Centrifugal Flow Fan Introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. Technical data series model Rotation

HG785 Alloyed Steel Medium Pressure Backward Mine Ventilate Centrifugal Flow Fan Introduction 6-04 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation systems in

Alloy Steel High Air Flow High Wear Resistance Drying Centrifugal Flow Fan Introduction At present, there are many series of boilers, and the situation of burning coal quality is quite different, after installing dust removal equipment and waste heat utilization equipment, insufficient pumping force affects normal operation. In order to overcome the insufficient pumping force due to the above reasons, the furnace has a positive pressure, which affects the combustion and

Alloy Steel Coupling Driven Energy Saving Forced Draft Boiler Fan Introduction 1.It can output higher outlet pressure and provide more gas flow at the same time, low noise. Stable operation at higher media temperatures. 2. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. 3. Motor slide guide can be provided for convenient belt tensioning to reduce energy loss caused by

Carbon Steel Single Inlet Metallurgy High Temperature Centrifugal Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The parts are closely matched and have good sealing performance to ensure the output pressure will not be reduced. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m/h) Power (kW) 9

Alloy Steel AC Motor Industrial Centrifugal Fans Explosion Protection Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. Typical applications include combustion air, pressure and vacuum drying,