"single inlet centrifugal blower"

Low Pressure High Air Flow Explosionproof Industrial Boiler ID Industrial Centrifugal Fans Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous

Single Suction Long Lifetime Heat Dissipation Stainless Steel Blower Introduction Of Centrifugal Fan The 6-06 series boiler fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The medium transported by the

Single Suction 16Mn Backward Curved Lime Kiln Flue Gas Blower Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials.

Single Suction Long Lifetime Backward Material Handling Blower Introduction 1. The adjustment door can be used to flexibly adjust the pressure and flow of the fan during operation. It can also be equipped with a variable frequency motor to adjust the pressure and flow of the fan by changing the speed. 2. The bearing cooling method selects a low-cost water-cooling method or an oil-cooling method with better heat dissipation depending on the gas temperature and the conditions

Alloy Steel High Pressure Materials Drying Flue Gas Blower Fan Introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating fluidized

Carbon Steel Coupling Driven Backward Coal Mill Explosion Proof Blower Introduction Of Centrifugal Fan The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. Technical data series model Rotation Speed (r/min) Total

Stainless Steel High Temperature Explosion Proofing Material Handling Blower Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Technical data

Long Life Backward Curved Corrosion Resistant High Temperature Centrifugal Fan Introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. The fans are divided

Industrial Exhaust Fans for Steam Boilers Centrifugal Fans and Blowers Detail introduction: Our Industrial Exhaust Fans for Steam Boilers, including Centrifugal Fans and Blowers, are specifically designed for exhaust systems in steam boilers, efficiently expelling high-temperature flue gases and ensuring optimal boiler performance. These fans are constructed with high-temperature resistant materials, capable of operating continuously and stably under high heat and load