|
| Place of Origin: | Henan China |
| Brand Name: | SIMO |
| Certification: | CE, ISO9001:2008,TUV |
| Model Number: | SIMO Blower 9-11 |
High Pressure Backward V-Belt Driven Materials Drying Centrifugal Fan
Introduction
The fan is suitable for equipped with economizer (heater) and smoke and dust removal device.
It is a high-efficiency energy-saving product jointly designed by the national fan industry and organized by the national wind power industry and the Ministry of Machinery Industry.
It has the characteristics of high efficiency, low noise, flat performance curve and wide efficient area.
Industrial boilers of 5 ~ 35 tons/hour can be used, those with similar intake conditions and suitable performance can be used, but the maximum temperature shall not more than250°C.
Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering the fan.
It can not only reduce the pollution of the smoke on the environment, but also reduce the wear of the smoke on the fan, which is conducive to prolonging the life of the fan.
Technical data
| series | model | Rotation Speed (r/min) |
Total Pressure (Pa) |
Air Capacity (m³/h) |
Power (kW) |
| 9-11 | 4C | 2900 | 2285～2452 | 3297～6594 | 5.5～7.5 |
| 4.5C | 2900 | 2893～3060 | 4695～9389 | 11～15 | |
| 5C | 2900 | 3570～3854 | 6440～12880 | 15～22 | |
| 5.6C | 2900 | 4482～4805 | 9048～18095 | 30～45 | |
| 6.3C | 1450 | 1422～1500 | 6441～12882 | 7.5～11 | |
| 7.1C | 1450 | 1804～1942 | 9220～18439 | 11～18.5 | |
| 8C | 1450 | 2285～2462 | 13189～26378 | 18.5～30 | |
| 9C | 1450 | 2893～3099 | 18779～37558 | 37～55 | |
| 10C | 1450 | 3570～3854 | 25760～42933 | 55～90 | |
| 11.2C | 960～1450 | 1961～4835 | 23961～72381 | 30～160 | |
| 12.5C | 730～960 | 1412～2638 | 25329～66620 | 22～90 | |
| 14C | 730～960 | 1775～3305 | 35586～93596 | 45～160 | |
| 16C | 730～960 | 2314～4295 | 53120～139712 | 75～280 |
Advantages and Features
1. When the airflow resistance is increased, the motor load will be automatically reduced and the motor will not be burnt.
2.The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.
3. Running test and vibration value detection after the production is completed, the fan operation is reliable.
