"large centrifugal blower"

Alloy Steel V-Belt Driven Backward Curved Cooling Centrifugal Flow Fan Introduction It can also be made into explosion-proof and flame-retardant type according to the requirements of use. It is suitable for occasions with flammable, explosive and corrosive gases. No viscous substances are allowed in the gas, and the dust and hard particles contained in the gas are not more than 150 mg/m3. The gas temperature does not exceed 80C, and similar gas properties are also available.

Heavy Duty Energy Saving Explosion Proof Blower Cooling Centrifugal Fan Introduction Of Centrifugal Fan The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous

High Air Flow Backward Antiwear Gas Delivery Centrifugal Ventilation Fans Introduction 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. The output gas flow is slightly larger than the 6-11 series heavy-duty centrifugal fan, the air volume is large, and the pressure is high, smooth operation, high reliability and long life. It is widely used in

Q345 Coupling Driven Backward Air Supply Explosion Proof Blower Introduction This explosion proof blower fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The motor shaft is elastically connected with the drive shaft. It is not necessary to tighten the belt or replace the belt frequently, and the maintenance workload is small. The fan is made of high quality carbon steel, and can also use

Carbon Steel V-Belt Driving Long Life Industrial Centrifugal Fans Furnace Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. The fan speed can be flexibly set by matching different pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. The bearing housing uses a labyrinth mechanical seal, a unique Leak proof oil design inside, a vent hole at the top, and a sealant on

Alloy Steel Single Inlet Long Lifetime Centrifugal Ventilation Fans Air Supply Introduction The 4-10 series centrifugal Fan can be used for indoor ventilation in general factories and large buildings. No viscous substances are allowed in the gas, and the dust and hard particles contained in the gas are not more than 150 mg/m3. The gas temperature does not exceed 80C, and similar gas properties are also available. Detail introduction Mainly to meet the dust emission

16Mn Heavy Duty Heat Dissipation Power Plant Fan Large Capacity Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Stainless steel centrifugal fan can transport corrosive gases containing acid and alkali components and chemical components. According to customer needs customized

AC Motor Large Capacity Power Plant Fan Energy Saving Kilns Cooling Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Conveying medium chlorinated tail gas, high concentration of organic matter, using large air volume, high pressure explosion-proof centrifugal fan, coupling

Centrifugal fan Boiler induced draft fan Various specifications factory direct sales Product description Industrial boiler is one of the most popular application areas for SIMO BLOWERs products. SIMO BLOWER can provide full sets of blower fan products, can meet 1~450T of coal fired boiler, biomass boiler, waste incineration boiler and other industrial boiler systems performance requirements. SIMO BLOWER is available for sale to the users of industrial boiler fan including: