"large centrifugal blower"

Energy Efficiency Backward Forced Draft Industrial Centrifugal Fans Introduction The Energy Efficiency Backward Industrial Centrifugal Fans can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series industrial centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation centrifugal

Long Lifetime Smoke Exhaust Backward Curved Induced Draft Blower Fan Introduction The Long Lifetime Smoke Exhaust Backward Curved Induced Draft Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. Long Lifetime Smoke Exhaust Backward Curved

HG785 Alloyed Steel Single Suction Ventilation Centrifugal Flow Fan Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above

Aluminium Alloyed Single Inlet Mine Ventilate Flue Gas Centrifugal Fan Introduction The 6-05 series fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The medium transported by the forced draft fan is air, and

Alloy Steel Large Capacity AC Motor Building Ventilation Centrifugal Ventilation Fans Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. The fans are commonly used in large-scale industrial systems

Carbon Steel Low Pressure Kilns Cooling Heavy Duty Centrifugal Fans Introduction Of Centrifugal Fan G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. The fan speed can be flexibly set by matching different diameters of belt pulley to make the fan run at the highest efficiency point and reduce energy waste. Motor sliding guides are provided for easy

Alloy Steel Backward Curved Air Purification Industrial Centrifugal Fans Introduction Of Centrifugal Fan G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. After the production is completed, all products are tested for running and vibration values for reliable operation. The V-belt drive makes your fan to operate at the optimum speed. Installation is simple

Carbon Steel Double Suction Material Handling Blower Backward Curved Introduction The 9-11 series fan has a large flow rate and moderate pressure. It is capable of outputting higher gas pressures and providing more gas flow with lower noise. When the airflow resistance is increased, the motor load will be automatically reduced and the motor will not be burnt. Detail introduction 1. Its a high-performance product promoted by the State Economic Commission and the Ministry of

Q235 Energy Saving Industrial Centrifugal Fans Heat Dissipation Introduction 4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants.It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the