"high temperature fans and blowers"

Industrial Heavy Duty Heat Dissipation Industrial Centrifugal Fans Introduction This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. It can be used for more than four years when the concentration of impurities is less than 200 mg/m3. If it contains a lot of impurities, it also can be used, but it will shorten the service

Single Suction V-Belt Driven Smoke Exhaust Centrifugal Flow Fan Introduction The 7-07 series high-pressure centrifugal fan has a high output pressure, can transport normal temperature or high temperature various gases and various forms of materials, and also can be used in harsh working environments. Such as conveying high temperature/harmful/dangerous gas, hard particles, powder, debris, fiber, forced ventilation, industrial dust collectors, air filtration systems, flue gas

Q345 Anticorrosion Kilns Cooling Large Capacity Centrifugal Flow Fan Introduction 1. It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. 2. The fan blade placement angle is optimized, more wear-resistant and longer service life. 3. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust

High Air Flow Low Pressure Backward Industrial Boiler PA Centrifugal Fan Introduction 1. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the pressure and flow of the fan by changing the speed. 2. For the material of impeller and main shaft, we will choose high-strength carbon steel, low-alloy steel, high-temperature alloy steel, high temperature resistant

Aluminum Alloy Backward Curved Impeller High Temperature Centrifugal Fan Introduction 6-04 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation systems in high

Low Pressure Carbon Steel Industrial Boiler FD Centrifugal Fan Introduction 1. It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. 2. The fan blade placement angle is optimized, more wear-resistant and longer service life. 3. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the

Q235 Low Pressure Single Inlet Thermal Power Induced Draft Fan Introduction: It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above

Alloy Steel Large Capacity AC Motor Building Ventilation Centrifugal Ventilation Fans Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. The fans are commonly used in large-scale industrial systems

Alternating Current Long Life Forward Material Handling Blower Introduction 1. It can output high out gas pressure and can work at higher medium temperature, suitable for any industrial occasion where high pressure & high temperature gas needs to be delivered. 2. Compact shape, saving space. 3. In the use of common base, the installation is very simple and requires little support from a professional technician. Technical data series model Rotation Speed (r/min) Total Pressure