"high temperature fans and blowers"

Single Inlet Efficient Energy-Saving Stokerfeed Boiler Industrial Centrifugal Fans Introduction 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. The output gas flow is slightly larger than the 6-11 series heavy-duty centrifugal fan, the air volume is large, and the pressure is high, smooth operation, high reliability and long life. It is widely used

Carbon Steel Anti Abrasive Coupling Driven High Pressure Centrifugal Fan Introduction The series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating

High Pressure Efficient Energy-Saving Centrifugal Blower Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more than 150

16Mn Large Capacity Coal Injection Industrial Centrifugal Fans Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and induced draft fans with the low noise. It

Single Suction 16Mn V-Belt Driven Corrosion Resistant Cement Fan Detail introduction : 1. According to customer performance requirements customized design, and optimized by CFD technology, the energy consumption is lower than similar models. 2. For the material of impeller and main spindle, we will choose high-strength carbon steel, low-alloy steel, high-temperature alloy steel, high temperature high-strength alloy steel for different working conditions temperature and

High Pressure Alloy Steel Coupling Driven Air Supply Centrifugal Flow Fan Introduction 1. It can output very high pressure and can work at higher medium temperature, suitable for any industrial occasion where high pressure & high temperature gas needs to be delivered. 2. In the case of using the common base , the installation is very simple and basically does not require the support of professional technicians. 3. The bearing box is reserved with the temperature and vibration

Large Capacity Long Lifetime Backward Materials Drying Centrifugal Flow Fan Introduction 1. It can output very high pressure and can work at higher medium temperature, suitable for any industrial occasion where high pressure & high temperature gas needs to be delivered. 2. In the case of using the common base , the installation is very simple and basically does not require the support of professional technicians. 3. The bearing box is reserved with the temperature and

Carbon Steel Single Suction Anti-Explosion Smoke Exhaust Flue Gas Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more

Aluminium Alloyed V-Belt Driving Energy Efficiency Biomass Boiler Flue Gas Fan Introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler,