"high temperature fans and blowers"

High Air Flow Corrosion Resistant Industrial Boiler ID Boiler Fan Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above

Single Suction Ventilation Kilns Cooling Mineral Powder Sintering Centrifugal Fan Introduction Single Suction Ventilation Kilns Cooling Mineral Powder Sintering Centrifugal Fan is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of centrifugal ventilation fan is currently used in the boiler industry. The air volume

High Volume Antifraying Forward Flue Gas Denitrification Cement Blower Fan Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and induced draft fans with the low

Coupling Driven Low Pressure Ventilation Boiler Fan Centrifugal Blower Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas,

Q235 Heavy Duty High Wear Resistance Metallurgy Induced Draft Centrifugal Fan Introduction 1. Made of high quality carbon steel, stainless steel or other metal materials are available upon request. 2. Ultrasonic flaw detection on the welding seam and main spindle of the impeller to ensure that there are no welding defects or material defects and ensure the strength. 3. Bearing cooling method: according to gas temperature and operating environment conditions choose low-cost

CFB Boiler Single Inlet Wear Resistant Air Circulation Fan Introduction: This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the

Garbage Incinerator Q345 Anti Abrasive Air Circulation Fan Centrifugal Introduction This series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series of centrifugal fans with a wide range of performance. 6-03 series medium pressure fans can be used to transport normal temperature or high temperature clean gas, dusty gas, flammable gas, corrosive gas, powder or

High-Strength Alloyed Steel Metallikon Ventilating Fan Centrifugal Blower Introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Application Centrifugal fan is

Medium Pressure Efficient Energy-Saving Foundry Explosion Proof Blower Product Features The 6-05 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. The fans are commonly used in large-scale industrial systems such as