"high temperature fans and blowers"

Furnace Coke Oven Medium Pressure Energy Saving Centrifugal Flow Fan Introduction 6-06 series centrifugal flow fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Furnace Coke Oven Medium Pressure

Industrial Kilns Cooling Dust Collector Centrifugal Blower Fan Introduction The Industrial Kilns Cooling Dust Collector Centrifugal Blower Fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust

Clay Sand Rotary Kiln Ventilation Industrial Centrifugal Flow Fan Introduction 6-04 series Industrial Centrifugal Flow Fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. Industrial Centrifugal Flow Fans are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow

High Volume Industrial Equipments Heat Dissipation Centrifugal Flow Fan Introduction The 6-03 series centrifugal flow fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series of centrifugal fans with a wide range of performance. 6-03 series medium pressure centrifugal flow fans can be used to transport normal temperature or high temperature clean gas, dusty gas,

Stainless Steel Fluidized Bed Boiler Explosion Proof Centrifugal Blower Fan Introduction The Stainless Steel Fluidized Bed Boiler Explosion Proof Centrifugal Blower Fan has moderate pressure and large flow, belongs to the low noise series fan and has stable performance. It can output higher outlet pressure and provide more gas flow with lower noise. Ability to work stably at higher media temperatures.Customized design according to customer's performance requirements, and

Coal-Fired Boiler Heat Dissipation Building Ventilation Centrifugal Fan Introduction The 4-10 series ventilation centrifugal and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. Coal-Fired Boiler Heat Dissipation Building Ventilation Centrifugal Fan can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow

High Pressure Forced Ventilating Single Inlet Centrifugal Blower Fan Introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating

Single Inlet Biomass Boiler Explosion Proof Centrifugal Blower Fan Introduction The Single Inlet Biomass Boiler Explosion Proof Centrifugal Blower Fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the Single Inlet Biomass Boiler Explosion Proof Centrifugal Blower Fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the

Grate Cooler Cooling Stainless Steel Air Blower Centrifugal Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more than