"high temperature fans and blowers"

HG785 Alloyed Steel Backward Antifraying Boiler Centrifugal Fan Introduction It has the characteristics of not easy dust accumulation and wear resistant, high efficiency and low noise. This series is a range of centrifugal fans with a wide range of performance. It is suitable for discharging gas containing dust, wood chips and finely divided fibers (If it contains hard particles, a dust removal device must be installed in front of the fan.), it can also be used as a general

Q345 Medium Pressure Antiwear Drying Centrifugal Flow Fan Introduction 1. It is capable of outputting a higher outlet pressure while providing more gas flow with lower noise. Stable operation at higher media temperatures. 2. The fan speed can be flexibly set by matching different pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. 3. Motor sliding guides are provided for easy tensioning of the belt to reduce energy loss due to belt

Q235 Single Inlet Cement Fan High Volume Backward Energy Saving Introduction The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the gas, and the dust and hard particles contained in the gas are not more than 150 mg/m3. Detail introduction It can also be made into explosion-proof and flame

16Mn Single Suction High Volume Industrial Centrifugal Fans Materials Drying Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. Made of high quality carbon steel, Stainless steel or other metal materials can also be used according to user requirements. Detail introduction The impeller is annealed to completely eliminate structural stresses generated

Efficient Energy-Saving Heavy Duty Centrifugal Fans Thermal Power Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. The plasma cutting, positioning fixture of high precision and all-welding technique contribute to the smoothness, high strength and great reliability of the steel blades that has uniform stress distribution for long-term high speed running. Detail introduction There exists a

280kw High Efficiency Low Pressure Centrifugal ID Fan in Boiler This 280kW centrifugal induced draft (ID) fan is engineered for high-efficiency, low-pressure operation in industrial boiler applications, delivering reliable flue gas extraction with optimized energy performance. Designed to handle large volumes of hot exhaust gases while maintaining system stability, it effectively supports combustion efficiency and emission control. Key Features Stable operation at high medium

Customized High-Volume and High-Efficiency Boiler Induced Draft FansOur custom-designed, high-volume, high-efficiency boiler induced draft fans are specifically engineered for large industrial boiler systems requiring reliable flue gas extraction and optimized energy efficiency. This series maintains stable negative pressure in boiler systems while handling high-temperature exhaust gases, ensuring combustion efficiency and operational safety.The precision-designed impeller

HG785 Alloyed Steel Backward Air Purification Material Handling Blower Introduction 6-06 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation systems in high pressure

HG785 Alloyed Steel Medium Pressure Backward Mine Ventilate Centrifugal Flow Fan Introduction 6-04 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation systems in