"stainless steel centrifugal blower"

Product Description: 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials. It is suitable for forced ventilation, forced cooling,

Stainless Steel Energy Saving Smelting Furnace Backward Boiler Fan Introduction It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met.The fan blade placement angle is optimized, more wear-resistant and longer service life.The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the pressure

Anti Abrasive High Air Flow V-Belt Driving Power Plant Industrial Blower Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the sanitary standards for industrial enterprises, and can also be used in various occasions with the same functional requirements. The 5-12 series centrifugal fan

Stainless Steel Large Capacity Industrial Boiler Waste Gas Dust Collecting Boiler Fan Introduction The Stainless Steel Large Capacity Industrial Boiler Waste Gas Dust Collecting Boiler Fan have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous

HG785 Alloyed Steel High Pressure Centrifugal Fan Induced Draft Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. The impeller is made of 12 sloped wing beveled blades, arc-conical front plate and flat-shaped rear plate welded together. The material is made of heat-resistant stainless steel. Impeller dynamic and static balance and overspeed test. Detail

Carbon Steel Kilns Cooling Industrial Centrifugal Fans Energy Saving Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. The fan adopts thick steel structure and non-overload impeller design, which is

AC Motor Long Life Biomass Boiler Centrifugal Ventilation Fans Introduction Medium temperature: The medium temperature of standard fans is not more than 80 C, the V-belt driving type fan can transport media below 150 C for a long time when it is added to the heat-dissipating wheel. It is widely used in environmental dust removal, material transportation, and industrial equipment. Application It is used to transport various common gases and hard materials in industrial

HG785 Alloyed Steel Single Suction Ventilation Centrifugal Flow Fan Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above

Low Pressure Single Inlet Anti-Explosion Drying Material Handling Blower Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed