"stainless steel centrifugal blower"

Furnace Coke Oven Medium Pressure Energy Saving Centrifugal Flow Fan Introduction 6-06 series centrifugal flow fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Furnace Coke Oven Medium Pressure

High Volume Industrial Equipments Heat Dissipation Centrifugal Flow Fan Introduction The 6-03 series centrifugal flow fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series of centrifugal fans with a wide range of performance. 6-03 series medium pressure centrifugal flow fans can be used to transport normal temperature or high temperature clean gas, dusty gas,

Long Lifetime Stokerfeed Boiler Explosion Proof Centrifugal Blower Fan Introduction 1. When the pressure requirement is met, a large gas flow can be output, and the noise is very low. 2. The motor selects the high-efficiency energy-saving motor of China's leading motor manufacturing enterprise (can also install the brand motor required by users), the quality is reliable, and the energy consumption is lower. 3. The V-belt drive makes your fan to operate at the optimum speed.

Material Handling Blower Large Capacity Energy Efficiency Air Blower Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. Technical data PRODUCT PARAMETERS Centrifugal Fan Application Temperature

Stainless Steel Single Inlet Long Life Forward Dust Collector Centrifugal Fan Detail introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances

Stainless Steel V-Belt Driven Furnace High Temperature Centrifugal Fan Introduction Of Centrifugal Fan The 9-11 series high temperature centrifugal blower has a large flow rate and moderate pressure. The fan can also be used in cement kiln decomposition process, steel smelting and other special occasions use of high temperature fan (use heat resistant & high strength material). When the airflow resistance is increased, the motor load will be automatically reduced and the

Long Life Single Inlet Building Ventilate High Pressure Centrifugal Fan Introduction High Volume Energy Saving Exhaust High Pressure Centrifugal Blower Fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The centrifugal fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short

Clay Sand Rotary Kiln Ventilation Industrial Centrifugal Flow Fan Introduction 6-04 series Industrial Centrifugal Flow Fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. Industrial Centrifugal Flow Fans are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow

Industrial Boiler Induced Draft Explosion Proof Centrifugal Blower Fan Introduction 1. Explosion Proof Centrifugal Blower Fan can output high pressure and is suitable for any industrial occasion where high pressure & normal temperature gas is required. 2. The energy transfer efficiency is high, the energy of the motor is directly applied to the impeller, and there is no energy consumption during the transfer. 3. The motor uses high-efficiency and energy-saving motors from