"material handling fan"

HG785 Alloyed Steel Backward Coal Injection Material Handling Blower Introduction 1. According to customer performance requirements customized design, and optimized by CFD technology, the energy consumption is lower than similar models. 2. For the material of impeller and main spindle, we will choose high-strength carbon steel, low-alloy steel, high-temperature alloy steel, high temperature high-strength alloy steel for different working conditions temperature and working

Antifraying Drying Ventilate Material Handling Centrifugal Blower Fan Introduction Antifraying Drying Ventilate Material Handling Centrifugal Blower Fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg /

V-Belt Driven High Temperature Material Handling Blower Centrifugal Fan Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. Mainly circulating fluidized bed system, smoke exhaust, material drying,

Stainless Steel High Air Flow Wear Resistant Material Handling Blower Fan Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. Mainly circulating fluidized bed system, smoke exhaust, material drying,

Single Inlet Forward Material Handling Blower Explosionproof Introduction The 9-08 series fan has a large flow rate and moderate pressure. Its suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. Detail introduction 1. The fan can output very high pressure, suitable for any need to transport high pressure & normal temperature gas

Stainless Steel V-Belt Driven Large Capacity Cooling Material Handling Blower Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and induced draft fans with the

Medium Pressure Backward Antifraying Material Handling Blower Fan Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. The impeller is subjected to a high standard of dynamic balancing adjusting to ensure stable operation of the fan. Test assembly after production is completed to ensure that there is no

Carbon Steel Single Suction Backward Curved Material Handling Blower Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. In the case of a monolithic bracket, the installation is very simple and

HG785 Alloyed Steel Backward Air Purification Material Handling Blower Introduction 6-06 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation systems in high pressure