"material handling fan"

16Mn High Temperature Material Handling Blower Anti-Explosion Introduction 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. Bearing cooling method: according to gas temperature and operating environment conditions choose low-cost water-cooling method or oil-cooling method with good heat dissipation performance. For extremely high temperature

Q345 High Pressure Material Handling Blower Energy Efficiency Introduction The 9-11 series fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. It has been compared with similar foreign products and tested by model test. Detail introduction 1. The fan can output very high pressure, suitable for any need to transport high pressure & normal

Material Handling Blower Large Capacity Energy Efficiency Air Blower Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. Technical data PRODUCT PARAMETERS Centrifugal Fan Application Temperature

Alloy Steel Single Suction Wear Resistant Material Handling Blower Introduction 1.The fan pressure is high, therefore it is especially suitable for 1-20t/h industrial boilers, which equipped with spiral pipes and multi-tube dust collector. 2.The induced draft fan is made into a single suction, different impeller diameter from 400mm to 3000mm. 3.The position of the air outlet of the fan is expressed by the angle of the air outlet of the casing."Left" and "Right" can be made

Carbon Steel Low Pressure Ventilation Material Handling Blower Fan Introduction The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. Suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous

Alloy Steel Double Inlet Material Handling Blower Lime Kiln Centrifugal Fan Introduction The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas

Coupling Driving Medium Pressure Anticorrosion Material Handling Blower Fan Introduction The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas

Single Suction High Volume Backward Material Handling Blower Fan Introduction The 7-08 series medium pressure centrifugal fan has moderate pressure and large flow, belongs to the low noise series fan and has stable performance. Its suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. Its a widely used medium-pressure heavy-duty

Single Inlet Stainless Steel Anti-Explosion Material Handling Blower Introduction 1. It can output higher outlet pressure and provide more gas flow at the same time, low noise. Stable operation at higher media temperatures. 2. The variable inlet damper can be used to flexibly adjust the pressure and flow of the fan during operation. The variable frequency motor can also be selected to adjust the pressure and flow of the fan by changing the speed. 3. Bearing cooling method: