"large centrifugal blower"

Carbon Steel Anti Abrasive Coupling Driven High Pressure Centrifugal Fan Introduction The series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating

Low Pressure Carbon Steel Industrial Boiler FD Centrifugal Fan Introduction 1. It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. 2. The fan blade placement angle is optimized, more wear-resistant and longer service life. 3. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the

High Temperature AC Motor Heat Dissipation Stainless Steel Blower Fan Introduction Of Centrifugal Fan The 6-06.51 series boiler fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The medium transported by the

High Volume Backward Curved CFB Boiler Centrifugal Flow Fan Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3. The fan can also

High Air Flow Backward Curved Drying Stainless Steel Blower Fan High Air Flow Backward Curved Drying Stainless Steel Blower Fan 15229 ~ 44128m3/H Introduction Of Centrifugal Fan G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs

16Mn Medium Pressure Wear Resistant Material Handling Blower Introduction 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. The output gas flow is slightly larger than the 6-11 series heavy-duty centrifugal fan, the air volume is large, and the pressure is high, smooth operation, high reliability and long life. Technical data series model Rotation

Single Inlet Forward Material Handling Blower Explosionproof Introduction The 9-08 series fan has a large flow rate and moderate pressure. Its suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. Detail introduction 1. The fan can output very high pressure, suitable for any need to transport high pressure & normal temperature gas

Large capacity High temperature Industrial kilns induced draft Blower 1. Applications for Large capacity High temperature Industrial kilns induced draft Blower The kiln induced draft fan regulates the air temperature in the furnace cavity by adjusting the exhaust air volume. When the temperature in the kiln is too high, increase the exhaust speed of the induced draft fan of the kiln to discharge the gas with an excessively high temperature in the kiln, thereby reducing the

Stainless Steel Single Inlet Energy Saving Induced Draft Fan Introduction: The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the gas,