"backward centrifugal fan"

Kiln frequency conversion fan Desulfurization and dust removal fan Flue gas desulfurization fan Product description Lots of blower fans that work in dust collector and air purification systems need to deal with dirty air, even high temperature and corrosive gas. We design the Dust collection fan, Flue gas desulfurization fan, Flus gas dentitrification fan, Abrasion fan and corrosion resistant fan for dust collecting system, gas desulfurization system, denitration system, in

Steel Plant Sintering Fan High Temperature Bag Dust Removal Fan G4-73 Converter Induced Draft Fan Product description The converter induced draft fan has high gas temperature and high dust content, which requires high pressure and flow of the fan, which is a severe challenge for the fan. SIMO BLOWER has prepared a lot of technical solutions for our converter system customers to deal with extremely harsh working conditions, making stable operation and reliable performance the

Long Lifetime Backward Explosion Proof Centrifugal Blower Fan Introduction The Long Lifetime Backward Explosion Proof Centrifugal Blower Fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the Long Lifetime Backward Explosion Proof Centrifugal Blower Fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are

Alternating Current Backward Dust Collector Centrifugal Blower Fan Introduction The Alternating Current Backward Dust Collector Centrifugal Blower Fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and

Backward Curved Stokerfeed Boiler Explosion Proof Centrifugal Blower Fan Introduction 1. Backward Curved Stokerfeed Boiler Explosion Proof Centrifugal Blower Fan can output higher outlet pressure and provide more gas flow at the same time, low noise. Stable operation at higher media temperatures. 2. The variable inlet damper can be used to flexibly adjust the pressure and flow of the fan during operation. The variable frequency motor can also be selected to adjust the

Backward Curved Drying Dust Collector Centrifugal Blower Fan Introduction 1. The Backward Curved Drying Dust Collector Centrifugal Blower Fan can output high pressure and is suitable for any industrial occasion where high pressure & normal temperature gas is required. 2. The energy transfer efficiency is high, the energy of the motor is directly applied to the impeller, and there is no energy consumption during the transfer. 3. The motor uses high-efficiency and energy-saving

Product Description Good performance Backward steam boiler industrial air extractor fan is applied in boiler smoke exhaust, whose driving mode is belt drive. According your requirement, SIMO can design the suction blower fan technical solution for you. Perfermance Good performance Backward steam boiler industrial air extractor fan Performance Pressure range 187~5482 Pa Air flow range 2403~17300 m3/h Impeller diameter 600~900 mm Speed 1500~2400 rpm Material Suction blower fan

Materials Delivery Of Industrial Kilns Centrifugal Blower Fan Introduction Medium requirements for 6-03 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 C, the V-belt driving type fan can transport media below 150C for a long time when

Coupling Driving Backward Carbon Steel Dust Collector Centrifugal Fan Detail introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Product features 1. According