"three phase blower"

High temperature high dust blower for Cement plant kiln exhaust blower High Temperature Blower Fan Temperature and dust are two challenges for this application, operation temperature may reach 500 degree C, Delivery capacity up to 700,000Nm3/hr with installed motor up to 4,500kW, the impeller diameter can reach 3.5m; model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m/h) Power (kW) 8C 1450 18592745 1100026400 15 ~ 22 9C 1450 23533474 1570037500 30 ~ 45 10C

ID fan for power plant up to 200MW urea fertilizer ID PA FD fan and FGD boost fan In energy sector we can provide blower and fan for both trandition and renewable energy generation. In a tradition power plant or captive power plant, we provide - Primary air fan (PA Fan); - Forced draught fan (FD Fan); - Induced draught fan (ID Fan); - FGD boost fan; Our blower and fan have been widely applied for the boilers with a capacity from 50 to 2000 t/h or power plant up to 600MW a

Coal Gas Boosting And Conveying Mine Ventilate Carbon Steel Centrifugal Fan Introduction The 5-06 series Centrifugal fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of Centrifugal fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced

CFB Boiler Single Inlet Wear Resistant Air Circulation Fan Introduction: This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the

Coal Injection Anti-Explosion V-Belt Driven Centrifugal Ventilation Fan Blower Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to

HG785 Alloyed Steel High Pressure Sintering Machine Heavy Duty Centrifugal Fans Detail introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the

Coupling Driving Industrial Anti-Explosion Induced Draft Fan Introduction Of Centrifugal Fan 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg / m3. It is suitable for

Stainless Steel Medium Pressure High Wear Resistance Induced Draft Fan Introduction Of Centrifugal Fan 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The fan has high efficiency, high total pressure, low noise, flat performance curve, wide economical use area, and adopts backward plate type blades. The efficiency of the

Industrial Energy Efficiency Anti-Explosion Lime Rotary Kiln Flue Gas Fan Introduction Of Centrifugal Fan Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 C, the V-belt driving type fan can transport media