"single inlet centrifugal fan"

Large Capacity Long Life Coal Injection Boiler Fan Energy Efficiency Introduction 5-12 series high temperature fan is suitable for conveying high temperature gas without corrosion, spontaneous combustion and temperature not exceeding 70O. If the dust content of the gas is large, dust removal device with dust removal efficiency not less than 85% should be equipped before the air inlet of the fan to improve the service life of the fan. Where the intake conditions are

Industrial Air Supply Boiler Fan Corrosion Resistant Backward Curved Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. Motor is carefully matched to the fan load, protection level IP54, and insulation class F. Motor ball bearings are used and lubricated. Motor and drives are isolated from the air stream to avoid grease or dirt accumulation.

HG785 Alloyed Steel High Volume Centrifugal Ventilation Fans Foundry Furnace Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Standard centrifugal fans, including single inlet, with a variety of radial bladed, forward curved, backward curved and self-cleaning impellers.

Q235 Single Suction Power Plant Fan Anti-Explosion Long Life Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. This series of fan can transport corrosive gas containing acid and alkali components and chemical components, corrosion resistance, stronger than other centrifugal fan

Single Suction Large Capacity Energy Saving Dust Removal Exhaust Fan Introduction The 9-10.19 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating

Stainless Steel V-Belt Driven Medium Pressure Cement Kiln Blower Fan Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. Mainly circulating fluidized bed system, smoke exhaust, material drying,

Stainless Steel High Temperature Explosion Proofing Material Handling Blower Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Technical data

Materials Drying Large Capacity Foundry Furnace Cement Ventilate Blower Fan Introduction The 6-06 series dust exhaust centrifugal fan has the characteristics of low dust accumulation and wear resistant. The Materials Drying Large Capacity Foundry Furnace Cement Ventilate Blower Fan is suitable for discharging gas containing dust, wood chips and finely divided fibers (If it contains hard particles, a dust removal device must be installed in front of the fan.), it can also be

Coal-Fired Boiler Heat Dissipation Building Ventilation Centrifugal Fan Introduction The 4-10 series ventilation centrifugal and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. Coal-Fired Boiler Heat Dissipation Building Ventilation Centrifugal Fan can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow