"single inlet centrifugal blower"

Double Suction Industrial High Temperature Medium Pressure Boiler Fan Introduction Of Centrifugal Fan This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type

Carbon Steel High Wear Resistance Power Plant Fan High Volume Introduction This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering the fan. Detail introduction The fan system running at normal temperature with an impeller diameter

Stainless Steel High Temperature Forward Material Handling Blower Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. The airflow channel and the impeller are optimized several times, which is more

Large Capacity Anticorrosion Alloy Steel Forced Draft Boiler Fan Introduction This series of fd pa fan in boiler can also be used for dust removal, mine ventilation and general ventilation systems. The gas boiler fan in boiler delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. It can be used for more than four years when the concentration of impurities is less than 200 mg/m3. There are a variety of part options to choose from.

High Temperature High Volume Induced Draught Boiler Blower Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more than

High Air Flow Low Pressure Backward Industrial Boiler PA Centrifugal Fan Introduction 1. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the pressure and flow of the fan by changing the speed. 2. For the material of impeller and main shaft, we will choose high-strength carbon steel, low-alloy steel, high-temperature alloy steel, high temperature resistant

Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan Introduction The Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than

Stainless Steel Long Life Industrial Air Supply Flue Gas Fan Introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating fluidized bed

Air Flow Single Suction High Wear Resistance Dust Collector Blower Fan Introduction The Air Flow Single Suction High Wear Resistance Dust Collector Blower Fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans