"large centrifugal fan"

16Mn V-Belt Driven Cement Fan Abrasion Resistant Building Ventilation Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. The impeller is annealed to eliminate the internal stress generated during welding,

Stainless Steel Double Suction Antiwear Cement Fan Air Purification Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. Fans have many uses in the chemical industry, such as the transportation of chemical raw materials, reaction gases, aeration stirring, sewage treatment, ventilation and exhaust, dust removal and so on. Also for the fertilizer industry phosphoric acid device, compound fertilizer device to

Industrial Boiler ID Forced Ventilating Carbon Steel Heavy Duty Blower Fan Introduction This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type transmission. This

Stainless Steel V-Belt Driven Low Pressure Industrial Boiler FD Blower Fan Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean

Low Pressure Coupling Driving Antifraying Industrial Boiler SA Centrifugal Fan Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are

Energy Efficiency Anti Abrasive Foundry Furnace Induced Draft Centrifugal Fan Introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Technical data series model

Garbage Incinerator Q345 Anti Abrasive Air Circulation Fan Centrifugal Introduction This series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series of centrifugal fans with a wide range of performance. 6-03 series medium pressure fans can be used to transport normal temperature or high temperature clean gas, dusty gas, flammable gas, corrosive gas, powder or

Snail Fan Large Capacity Explosionproof Id Fd Fan Manufacturer Boiler Fan Introduction Of Centrifugal Fan Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. This series of fans is a new type of high efficiency industrial fan in the field of small flow and medium pressure. The collector is

Q345 Coupling Driving Foundry Furnace Antiwear Dust Collector Fan Introduction The Q345 Coupling Driving Foundry Furnace Antiwear Dust Collector Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving product jointly