"large centrifugal fan"

Industrial Long Life Blast Furnace Boiler Fan Explosion Proofing Introduction This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type transmission. Detail introduction

Low Pressure Alternating Current Induced Draught Long Lifetime Boiler Fan Introduction 1. When the pressure requirement is met, a large gas flow can be output, and the noise is very low. 2. The fan speed can be flexibly set by matching different diameters of belt pulley to make the fan run at the highest efficiency point and reduce energy waste. 3. Motor sliding guides are provided for easy tensioning of the belt to reduce energy loss due to belt slack. 4. When the airflow

V-Belt Driven Corrosion Resistant Air Purification Material Handling Blower Introduction The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. Suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No

Steam Power Plant Gas Delivery V-Belt Driving Long Life Air Fan Introduction 6-03 series medium pressure fans can be used to transport normal temperature or high temperature clean gas, dusty gas, flammable gas, corrosive gas, powder or granular materials, fiber materials, etc. Mainly used in the industrial field, typical applications are: forced ventilation, forced cooling and heat dissipation, material drying, air purification equipment, industrial dust collector system, air

Long Lifetime Smoke Exhaust Backward Curved Induced Draft Blower Fan Introduction The Long Lifetime Smoke Exhaust Backward Curved Induced Draft Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. Long Lifetime Smoke Exhaust Backward Curved

Coupling Driving High Temperature Cooling Induced Draft Blower Fan Introduction The Coupling Driving High Temperature Cooling Induced Draft Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. Coupling Driving High Temperature Cooling Induced

High Temperature Resistant Stainless Steel first forced draft boiler fan mine ventilation centrifugal fan Series Model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m/h) Power (kW) 5-05 2.5A~6.5A 1420~2825 907~1313 599~11053 0.75~5.5 4C~10C 1600~2900 1232~3867 3007~44413 3~45 8D~12.4D 1450 1989~4051 12028~76740 15~90 5-06 8F~31.5F 480~1450 1358~9828 9890~709000 15~2000 5-11 4C~9C 1740~2900 990~3197 2750~36140 3~37 12D~12.4D 1450 2471~3903 37100~75330 75~90 5-12 4C

Product Description 4-75kw Q235 Carbon structural steel sintering blower induced draft fan The 4-75kW Q235 Carbon Structural Steel Sintering Induced Draft Fan is designed for high-temperature flue gas and industrial exhaust emission. Constructed with durable Q235 carbon steel for heat and corrosion resistance, it offers robust performance. With a power range of 4-75kW, it delivers high airflow and pressure, ideal for sintering processes and ventilation systems in metallurgy,

4-110kw Q235 Carbon structural steel biomass boiler system blower and induced draft fan The 4-110kW Q235 Carbon Structural Steel Sintering Induced Draft Fan is designed for high-temperature flue gas and industrial exhaust emission. Constructed with durable Q235 carbon steel for heat and corrosion resistance, it offers robust performance. With a power range of 4-75kW, it delivers high airflow and pressure, ideal for sintering processes and ventilation systems in metallurgy,