"industrial ventilation fan"

Backward Coupling Driven Explosion Proof Centrifugal Blower Fan Introduction Backward Coupling Driven Explosion Proof Centrifugal Blower Fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials. Backward

Stainless Steel Blade Blower With Motor Material Centrifugal Fan Introduction The 4-09 series large-flow centrifugal fan is suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous substances are allowed inside the gas, and the dust and hard particles contained

High Wear Resistance Q345 Long Lifetime Flue Gas Centrifugal Blower Fan Introduction The High Wear Resistance Q345 Long Lifetime Flue Gas Centrifugal Blower Fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the High Wear Resistance Q345 Long Lifetime Flue Gas Centrifugal Blower Fan should be no more than 80 C air and other gases that are not self-igniting and are not

Industrial Long Lifetime Explosion Protection Flue Gas Centrifugal Blower Fan Introduction The Industrial Long Lifetime Explosion Protection Flue Gas Centrifugal Blower Fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of Flue Gas Centrifugal Blower Fan can also be used for dust removal, mine ventilation and general

Single Inlet High Temperature Fluidized Bed Boiler Centrifugal Flow Fan Introduction This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. It can be used for more than four years when the concentration of impurities is less than 200 mg/m3. If it contains a lot of impurities, it also can be used, but it will shorten the

High Volume High Temperature Energy Saving Metallurgy Dust Collector Fan Introduction The 9-10.28 series dust extractor fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. The dust collector exhaust fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements. When the airflow resistance is increased, the motor load will be

AC Motor Long Lifetime Single Inlet Anti Abrasive Dust Collector Fan Introduction The 9-08 series collector fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The dust extractor fan system running at normal temperature with an impeller diameter of less than 1400 mm does not require additional configuration of bearing

Product Description: 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials. It is suitable for forced ventilation, forced cooling,

Q235 Single Inlet Forced Draft Of Industrial Kilns Centrifugal Boiler Blower Fan Introduction The Q235 Single Inlet Forced Draft Of Industrial Kilns Centrifugal Boiler Blower Fan can be used for indoor ventilation in general factories and large buildings. It can be used as both an input gas and an output gas. The type of gas transported is air and other non-self-igniting, non-self-explosive, non-surrounding, harmless to the human body and is non-corrosive to steel materials.