"impeller centrifugal fan"

Electric Actuator Rolling Bearing Mineral Powder Sintering Air Ventilation Fan Detail introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the

Alloy Steel Large Capacity AC Motor Building Ventilation Centrifugal Ventilation Fans Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. The fans are commonly used in large-scale industrial systems

Carbon Steel Medium Pressure Antiwear Cement Centrifugal Blower Fan Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. The fan is equipped with temperature and vibration sensors, which can easily install the fan operation monitoring device. Made of high quality carbon steel,

Carbon Steel High Volume Anti-Explosion Foundry Induced Draft Fan Introduction Of Centrifugal Fan This series of induced draft is a new type of high efficiency industrial fan in the field of small flow and medium pressure. According to customer performance requirements customized design, and optimized by CFD technology, the energy consumption is lower than similar models. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the

Forced Ventilating Air Filtration System Induced Draught Exhaust Blower Fan Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. In the coal-fired boiler system, the ventilation and induce draft systems of various boilers with evaporation capacity of 20 tons/hour to 800 tons/hour can be configured.

Single Inlet Explosion Proofing Industrial Dust Collector Centrifugal Fan Introduction The Single Inlet Explosion Proofing Industrial Dust Collector Centrifugal Fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard

Energy Saving Oven Wall Cooling Dust Collector Centrifugal Blower Fan Introduction The Energy Saving Oven Wall Cooling Dust Collector Centrifugal Blower Fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150

Antifraying Cement Rotary Kiln Explosion Proof Centrifugal Blower Fan Introduction The Antifraying Cement Rotary Kiln Explosion Proof Centrifugal Blower Fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard

Industrial Boiler Induced Draft Explosion Proof Centrifugal Blower Fan Introduction 1. Explosion Proof Centrifugal Blower Fan can output high pressure and is suitable for any industrial occasion where high pressure & normal temperature gas is required. 2. The energy transfer efficiency is high, the energy of the motor is directly applied to the impeller, and there is no energy consumption during the transfer. 3. The motor uses high-efficiency and energy-saving motors from