"high temperature blower fan"

Carbon Steel Anti Abrasive Coupling Driven High Pressure Centrifugal Fan Introduction The series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating

High Pressure Efficient Energy-Saving Centrifugal Blower Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more than 150

Q345 Anticorrosion Kilns Cooling Large Capacity Centrifugal Flow Fan Introduction 1. It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. 2. The fan blade placement angle is optimized, more wear-resistant and longer service life. 3. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust

Low Pressure Carbon Steel Industrial Boiler FD Centrifugal Fan Introduction 1. It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. 2. The fan blade placement angle is optimized, more wear-resistant and longer service life. 3. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the

Q345 V-Belt Driving Long Lifetime Steam Boiler Blower Fan Introduction 1. Fan systems with impeller diameters less than 1400 mm at normal temperature do not require additional bearing cooling devices, reducing users investment and maintenance. 2. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks. 3. The weld of the impeller and the main shaft are ultrasonic flaw detection to ensure

High Air Flow Backward Antiwear Gas Delivery Centrifugal Ventilation Fans Introduction 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. The output gas flow is slightly larger than the 6-11 series heavy-duty centrifugal fan, the air volume is large, and the pressure is high, smooth operation, high reliability and long life. It is widely used in

Single Inlet Abrasion Proof Lime Kiln Heavy Duty Centrifugal Fans Detail introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3.

Low-pressure Wear-resistant Centrifugal Fans and Induced Draft Fans for Metallurgical Sintering Processes Product Overview Designed to meet dust emission requirements for electric arc furnace exhaust gas purification equipment, these fans improve workshop environments and ensure dust concentrations comply with industrial enterprise sanitary standards. Suitable for various applications with similar functional requirements. The 5-12 series centrifugal fan is an enhanced version

280kw High Efficiency Low Pressure Centrifugal ID Fan in Boiler This 280kW centrifugal induced draft (ID) fan is engineered for high-efficiency, low-pressure operation in industrial boiler applications, delivering reliable flue gas extraction with optimized energy performance. Designed to handle large volumes of hot exhaust gases while maintaining system stability, it effectively supports combustion efficiency and emission control. Key Features Stable operation at high medium