"high temperature air blower"

Aluminium Alloyed AC Motor CFB Boiler Explosion Proof Blower Fan Product Features The 6-11 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas

Carbon Steel V-Belt Driving High Volume Dust Collector Fan Blower Detail introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed

Aluminium Alloyed Long Lifetime Coal Mill High Pressure Centrifugal Fan Introduction Of Centrifugal Fan Its a high-performance product promoted by the State Economic Commission and the Ministry of Machinery Industry. It has the advantages of high efficiency, low noise, wide performance and high efficiency curve. Applicable to industrial boilers of 5 ~ 35 tons/hour, the similar intake conditions and performance can be adapted, but the maximum temperature should not exceed 250

16Mn V-Belt Driven Backward Cement Kiln High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The fan with explosion-proof motor, and its performance parameters are the same as those ordinary motors. The fan has high efficiency, low

Stainless Steel V-Belt Driven Explosionproof Drying Industrial Centrifugal Fans Introduction Of Centrifugal Fan The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks. Fan systems with impeller diameters less than 1400 mm at normal temperature do not require additional

Double Suction Aluminium Alloyed Anti-Explosion Flue Gas Blower Fan Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The fan with explosion-proof motor, and its performance parameters are the same as those ordinary motors. The motor shaft is elastically

dilution fan desulfurization system Introduction Of dilution fan Dilution fan refers to the process in which a large amount of air is pumped into the SCR(selective catalytic reduction) denitration process to dilute ammonia to a certain proportion and then sprayed into the reactor pipeline to remove nitrogen oxides from the combustion flue gas in the power plant, so as to achieve the purpose of environmental protection. The dilution fan produced by our company is widely used

Coupling Driving Blowers with High CFM, centrifugal fan Performance:Coupling Driving Power Plant Blowers with High CFM Working Temperature:< 500 degree Air composition: Clean air, Dusty air, Corrosive gas, Combustible gas Dust composition: Powder materials, Light particle materials, etc. Impeller diameter: 300~3000 mm Speed of mainshaft: 960~2900 rpm Pressure range: 705~25425 Pa Flow range: 3297~93305 m3/h Power: 1.1 kw~1000 kw Drive model: Direct drive, belt drive, coupling

G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty gas, flammable gas, corrosive gas, powder or granular materials at normal