"high pressure industrial air blower"

Heavy Duty Long Lifetime Industrial Kilns Centrifugal Ventilation Fans Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. Application It is used to transport various common gases and hard materials

AC Motor Medium Pressure Anticorrosion Induced Draft Centrifugal Fan Introduction Of Centrifugal Fan Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 C, the V-belt driving type fan can transport media below

Stainless Steel Medium Pressure High Wear Resistance Induced Draft Fan Introduction Of Centrifugal Fan 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The fan has high efficiency, high total pressure, low noise, flat performance curve, wide economical use area, and adopts backward plate type blades. The efficiency of the

Double Suction Industrial High Temperature Medium Pressure Boiler Fan Introduction Of Centrifugal Fan This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type

Single Inlet Medium Pressure Building Ventilation Stainless Steel Blower Introduction Of Centrifugal Fan The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. The bearing cooling method selects a low-cost water

HG785 Alloyed Steel High Temperature Construction Blower Fan Boiler Fan Introduction Of Centrifugal Fan 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. In the case of common base, the installation is very simple and requires little support from a professional technician. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air

Medium Pressure Power Plant Fan Efficient Energy-Saving Anti Abrasive Introduction The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. The impeller is subjected to a high standard of dynamic balancing adjusting to ensure stable operation of the fan. It has the characteristics of not easy dust accumulation and wear resistant, high efficiency and low noise. This series is a

AC Motor Backward Explosion Proof Blower High Wear Resistance Introduction The 6-06.51 series boiler fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. This series of fan design is based on aerodynamic sketches determined by more than one year of model test and adopts advanced proprietary technology, such as high

Q345 Coupling Driven Antiwear Industrial Centrifugal Fans Drying Introduction 4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants.It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the