"high pressure industrial air blower"

Carbon Steel Coupling Driven Corrosion Resistant Industrial Boiler FD Blower Fan Introduction 6-04 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation systems in

China Hot Selling Air Exhaust Centrifugal Industrial Blower Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more than 150

Stainless Steel Large Capacity Anti-Explosion Air Purification Cement Blower Fan Introduction This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type transmission.

Q345 Single Inlet Energy Saving CFB Boiler Centrifugal Blower Fan Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. It can work stably at a high medium

16Mn Single Inlet Large Capacity Centrifugal Flow Fan Blower Introduction This can use different speeds to meet the requirements of various dust collectors in the same tonnage boiler, combined redundant fan series and machine number. It is used to transport various common gases and hard materials in industrial production, and is suitable for various harsh conditions such as high temperature, wear and corrosion. It is capable of outputting a higher outlet pressure while

7-08 Q345 High Pressure Backward Curved Centrifugal Flow Fan Introduction The 7-08.26 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Technical data

3000 Cfm Oven Wall Cooling Stainless Steel Centrifugal Blower Introduction The fans are commonly used in large-scale industrial systems such as large dust removal systems, industrial desulfurization and denitrification, large industrial boiler systems, large industrial rotary kilns and calcining kiln systems, and mineral powder sintering (sintering machines) and so on. The fans are commonly used in large-scale industrial systems such as large dust removal systems, industrial

Material Handling Convey Wheel High Volume Fan Centrifugal Blower Introduction The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. The main components of the centrifugal fan are: impeller, casing, coupling and shaft. The impeller is the main work component that generates wind pressure and transfers energy; the casing is mainly used to introduce gas and exhaust gas, and at the same time convert part of the kinetic energy of the gas into

Heavy Duty Industrial Explosion Proof Metallurgy Blower Fan Product Features It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above