"general ventilation fan"

Large Capacity Efficient Energy-Saving Backward Induced Draft Fan Introduction Of Centrifugal Fan 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. For the material of impeller and main shaft, we will choose high-strength carbon steel, low-alloy steel, high-temperature alloy steel, high temperature resistant high-strength

Industrial Long Life Blast Furnace Boiler Fan Explosion Proofing Introduction This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type transmission. Detail introduction

Backward Curved Medium Pressure Explosion Protection Boiler Fan Introduction This series fans not only provide high efficiency and energy saving equipment for cement industry, but also the better equipment for other industrial furnaces. The product has advanced design, compact structure, easy to remove the maintenance, safe and reliable operation, wear resistance, high temperature resistant, high efficiency, low noise, smooth performance curve, wider range of flow control,

Q235 Single Suction Power Plant Fan Anti-Explosion Long Life Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. This series of fan can transport corrosive gas containing acid and alkali components and chemical components, corrosion resistance, stronger than other centrifugal fan

Coupling Driving Forward High Pressure Centrifugal Fan Lime Kiln Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. Fan inlet shall be aerodynamic design round curved section to transit the air to the wheel cone smoothly, it shall have good commutated effect to reduce turbulence, improve fan efficiency and reduce noise. Detail introduction The wheel has a stable

High temperature high dust blower for Cement plant kiln exhaust blower High Temperature Blower Fan Temperature and dust are two challenges for this application, operation temperature may reach 500 degree C, Delivery capacity up to 700,000Nm3/hr with installed motor up to 4,500kW, the impeller diameter can reach 3.5m; model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m/h) Power (kW) 8C 1450 18592745 1100026400 15 ~ 22 9C 1450 23533474 1570037500 30 ~ 45 10C

5000 cfm Centrifugal Fan - Centrifugal Fan Suppliers Heavy Duty Industrial Centrifugal Blower Series Model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m/h) Power (kW) 4-09 2.8A~6A 960~2900 179~3187 794~15456 0.75~15 6C~12C 400~2240 220~3143 3684~75552 1.1~75 6D~12D 730 ~ 1450 317~3202 4420~64759 1.5~55 4-10 8D~29.5D 480~1450 343~5423 15229~810000 5.5~1250 20F~31.5F 580~960 1510~6181 121000~878200 185~1600 4-14 2.8A~5A 1450 ~ 2900 166~3314 565~40585 0.55~15 6.3C

Industrial Manufacturing Plant Centrifugal Exhaust Blower Fan Series Model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m/h) Power (kW) 5-05 2.5A~6.5A 1420~2825 907~1313 599~11053 0.75~5.5 4C~10C 1600~2900 1232~3867 3007~44413 3~45 8D~12.4D 1450 1989~4051 12028~76740 15~90 5-06 8F~31.5F 480~1450 1358~9828 9890~709000 15~2000 5-11 4C~9C 1740~2900 990~3197 2750~36140 3~37 12D~12.4D 1450 2471~3903 37100~75330 75~90 5-12 4C~12.5C 1000~3550 742~4234 2065~67803 2.2~110

Industrial Backward Curved Air Supply Biomass Boiler Centrifugal Fan Introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. The fans are divided into general