"general ventilation fan"

Alloy Steel Double Inlet Wear Resistant Brick Kiln Centrifugal Ventilation Fans Introduction This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The medium transported by the forced draft fan is air, and the medium transported by the induced draft fan is flue gas or a gas containing impurity particles. It can be used for more than four years when the concentration of impurities is less than 200 mg/m3.If it contains large

HG785 Alloyed Steel Heavy Duty Centrifugal Ventilation Fans Materials Drying Introduction The 4-10 series centrifugal Fan can be used for indoor ventilation in general factories and large buildings. The casing is welded into a cochlear body by steel plates.The casing is welded into a cochlear body by steel plates. Detail introduction The transmission group is composed of a main shaft, a belt wheel and a water-cooled bearing box. The housing is welded into a cochlear body with

Smelting Furnace Industrial Flue Gas Denitrification Ventilation Centrifugal Fan Introduction The 4-14 series centrifugal ventilation fan is suitable for indoor ventilation in general factories and large buildings. Smelting Furnace Industrial Flue Gas Denitrification Ventilation Centrifugal Fan can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not

Product Description: The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more than 150 mg/m3. For flammable and explosive gas transportation

Kilns Cooling Steam Power Plant Mine Ventilation Centrifugal Blower Fan Detail introduction The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue

Corrosive Gas Delivery Electric Air Blower Industrial Ventilation Exhaust Fan Introduction The 4-09 series large-flow centrifugal ventilation fan is suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous substances are allowed inside the gas, and the dust and

Electric Actuator Rolling Bearing Mineral Powder Sintering Air Ventilation Fan Detail introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the

D Series Centrifugal Fan Introduction Of D Series Centrifugal Fan D series centrifugal fan can be widely used to transport materials, air and gas without corrosion, spontaneous combustion and viscous substances. The temperature of the conveying medium is generally not more than 80, and the dust and hard particles are not more than 150mg/m. It is suitable for high pressure forced ventilation in general forging, glass, ceramics, radio, electroplating, storage battery and

Materials Drying Main Shaft Alternating Current Centrifugal Ventilation Fans Detail introduction : The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances