"general ventilation fan"

HG785 Alloyed Steel High Temperature Construction Blower Fan Boiler Fan Introduction Of Centrifugal Fan 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. In the case of common base, the installation is very simple and requires little support from a professional technician. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air

The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3. The fan can also be used in cement kiln decomposition process, steel smelting and other

Y9-19 Boiler Induced Draft Fan Introduction Of Y9-19 blower fan Product Description: 9-19, 9-26 High-Pressure Centrifugal Ventilator The model 9-19 high-pressure centrifugal ventilator has the advantages of high efficiency, low noise, flat performance curve, and wide areas of high efficiency compared with the same type of ventilator at home and abroad. Scope of application: Generally speaking, the ventilator is used for forging furnaces and high-pressure forced ventilation,

Double Suction Industrial Induced Draft Fan SS304 Mild Steel Air Ventilator High-Pressure Centrifugal Blower Product description 4-2X73 series centrifugal fan Product introduction: 4-2X73 series centrifugal fan is mainly used for large induced draft and dust removal systems in metallurgy, electric power, cement, and other industries. Due to the development of production, the boiler capacity has increased, the volume of steelmaking furnaces has also increased, and the amount

Forced Ventilating Rolling Bearing Smelting Furnace Motor Blower Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more

Single Suction Anti-Explosion Forward Fluidized Bed Boiler Blower Fan Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas,

Q235 Single Suction High Air Flow High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-08 series high static pressure blower is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. It can not only reduce the pollution of the smoke on the environment, but also reduce the wear of the smoke on the fan, which is

4-72 Single Inlet Centrifugal Fan for Boiler suction blower centrifugal fan 1. Applications for Single Inlet Centrifugal Fan for Boiler 4-72-NO10C/30KW Centrifugal Ventilator Channel Blower Kiln Dust Exhaust Ventilation The 4-72 centrifugal fan is used as indoor ventilation for general factories and large buildings. It can be used as input gas or output gas. Air and other gases that are not spontaneously combustible, harmless to the human body, and non-corrosive to steel

Product descriptipn: The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more than 150 mg/m3. For flammable and explosive gas transportation