"centrifugal air blower"

HG785 Alloyed Steel Long Life Antifraying Centrifugal Ventilation Fans Introduction The 7-10 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 87%. It belongs to small flow and medium pressure series. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m/h) Power (kW) 7-10 5D 3030 2982 ~ 3456 4486 ~ 8971 11 ~ 15 5.6D 2360 2623

Single Inlet High Temperature Fluidized Bed Boiler Centrifugal Flow Fan Introduction This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. It can be used for more than four years when the concentration of impurities is less than 200 mg/m3. If it contains a lot of impurities, it also can be used, but it will shorten the

16Mn Single Suction Building Ventilation Heavy Duty Centrifugal Fans Introduction Of Centrifugal Fan G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. When the

Long Lifetime Abrasion Proof Foundry High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-10 series high-pressure centrifugal fan is the latest developed high-efficiency and energy-saving product, whose performance fully meets the aerodynamic performance of general fan 9-08 series, and has the characteristics of high efficiency, low noise, flat performance curve, large flow regulation range and wide efficient area. It is suitable for conveying air and non

Carbon Steel Medium Pressure Antiwear Cement Centrifugal Blower Fan Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. The fan is equipped with temperature and vibration sensors, which can easily install the fan operation monitoring device. Made of high quality carbon steel,

Alloy Steel Backward Curved Air Purification Industrial Centrifugal Fans Introduction Of Centrifugal Fan G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. After the production is completed, all products are tested for running and vibration values for reliable operation. The V-belt drive makes your fan to operate at the optimum speed. Installation is simple

Q345 Coupling Driven Backward Air Supply Explosion Proof Blower Introduction This explosion proof blower fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The motor shaft is elastically connected with the drive shaft. It is not necessary to tighten the belt or replace the belt frequently, and the maintenance workload is small. The fan is made of high quality carbon steel, and can also use

Stainless Steel V-Belt Driven Long Life Drying Explosion Proof Blower Introduction This explosion proof blower fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The blower explosion proof is suitable for equipped with economizer (heater) and smoke and dust removal device. The fan can also be used in cement kiln decomposition process, steel smelting and other special occasions use of high

Q235 Single Suction Steam Boiler High Temperature Centrifugal Fan Introduction The 7-08 series high temperature centrifugal blower is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. Its suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. The current