"centrifugal air blower"

Energy Saving Backward Curved Dust Collector Centrifugal Blower Fan Introduction 1.The Energy Saving Backward Curved Dust Collector Centrifugal Blower Fan can output higher outlet pressure and provide more gas flow at the same time, low noise. Stable operation at higher media temperatures. 2. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. 3. Motor slide guide can be

Dust Extraction Draft High Volume Power Plant Centrifugal Exhaust Fan Introduction The Dust Extraction Draft High Volume Power Plant Centrifugal Exhaust Fan is suitable for indoor ventilation in general factories and large buildings. Dust Extraction Draft High Volume Power Plant Centrifugal Exhaust Fan can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are

Long Lifetime Smoke Exhaust Backward Curved Induced Draft Blower Fan Introduction The Long Lifetime Smoke Exhaust Backward Curved Induced Draft Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. Long Lifetime Smoke Exhaust Backward Curved

Q235 Efficient Energy-Saving Anti-Explosion Boiler Centrifugal Blower Fan Introduction The 7-10 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 87%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields.

Single Suction High Air Flow Backward Biomass Boiler Blower Fan Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the

Export Wooden Case Packing, Steel pallet Packing Introduction The 4-09 series large-flow centrifugal fan is suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous substances are allowed inside the gas, and the dust and hard particles contained in the gas are

Carbon Steel Efficient Energy-Saving Mine Ventilation Centrifugal Blower Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are

Material Handling Convey Wheel High Volume Fan Centrifugal Blower Introduction The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. The main components of the centrifugal fan are: impeller, casing, coupling and shaft. The impeller is the main work component that generates wind pressure and transfers energy; the casing is mainly used to introduce gas and exhaust gas, and at the same time convert part of the kinetic energy of the gas into

Coal Injection Anti-Explosion V-Belt Driven Centrifugal Ventilation Fan Blower Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to