"backward curved centrifugal blower"

Kiln frequency conversion fan Desulfurization and dust removal fan Flue gas desulfurization fan Product description Lots of blower fans that work in dust collector and air purification systems need to deal with dirty air, even high temperature and corrosive gas. We design the Dust collection fan, Flue gas desulfurization fan, Flus gas dentitrification fan, Abrasion fan and corrosion resistant fan for dust collecting system, gas desulfurization system, denitration system, in

Product Description: Induced Draft Fan (ID Fan Blower) is a high-performance industrial radial fan designed to deliver superior performance and energy efficiency. It works at a voltage of 380V/50Hz, ambient temperature of 20-500, and pressure of 2000-10000Pa. With a backward curved blade type, the fan is driven by an AC motor for reliable and long-lasting operation. It can efficiently and cost-effectively provide the necessary air movement for a wide range of industrial

Q345 High Strength Steel Induced Draft Industrial Blower Fan Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. Q345 High Strength Steel Induced Draft Industrial Blower Fan can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. The fans are commonly used in

Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan Introduction The Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than

Biomass Fuel Power Plant Smoke Exhaust Anti-Explosion Air Blower Fan Introduction The 9-08 series has the characteristics of high efficiency, low noise, flat performance curve and wide efficient area. Industrial boilers of 5 ~ 35 tons/hour can be used, those with similar intake conditions and suitable performance can be used, but the maximum temperature shall not more than250C. Before the induced draft fan, dust removal device with a dust removal efficiency of no less than

Single Suction Large Capacity Energy Saving Dust Removal Exhaust Fan Introduction The 9-10.19 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating

Product Description: The Dust Collector Fan is built to last, with a long warranty that ensures you can rely on it for years to come. This product is made from high-quality materials, including Stainless Steel 201, 304, 316, and 316L. These materials are durable and corrosion-resistant, making them ideal for use in industrial settings. In addition to its durability, the Dust Collector Fan is also waterproof. It meets the IP44, IP54, and IP55 waterproof standards, which means

Efficient Energy-Saving Boiler Fan High Temperature Materials Cooling Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. The fan housing shall be made in steel and its thickness and strength should be able to withstand the maximum running weight of the fan. The volute shall be continuously welded and equipped with access door for removing

Product descriptipn: The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more than 150 mg/m3. For flammable and explosive gas transportation