"backward curved centrifugal blower"

Industrial Kilns Cooling Dust Collector Centrifugal Blower Fan Introduction The Industrial Kilns Cooling Dust Collector Centrifugal Blower Fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust

Coupling Driving Energy Saving Explosion Proof Centrifugal Blower Fan Introduction 1. Coupling Driving Energy Saving Explosion Proof Centrifugal Blower Fan can output higher outlet pressure and provide more gas flow with lower noise. Ability to work stably at higher media temperatures. 2. Customized design according to customer's performance requirements, and optimized by CFD technology, the energy consumption is lower than similar models. 3. The airflow channel and the

AC Motor High Temperature Air Supply Flue Gas Centrifugal Blower Fan Introduction The AC Motor High Temperature Air Supply Flue Gas Centrifugal Blower Fan can be used for indoor ventilation in general factories and large buildings. It can be used as both an input gas and an output gas. The type of gas transported is air and other non-self-igniting, non-self-explosive, non-surrounding, harmless to the human body and is non-corrosive to steel materials. The AC Motor High

Low Pressure Heavy Duty Centrifugal Fans Gas Delivery Backward Introduction The 4-10 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. The fan adopts advanced technology. The design of backward curved centrifugal wheel is optimized by means of CFD hydro-field simulating. The design is more accordant with the aerodynamic characteristics, high efficiency, and stable airflow. Detail introduction There exists a maximum

Carbon Steel Coupling Driven Corrosion Resistant Industrial Boiler FD Blower Fan Introduction 6-04 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation systems in

Coupling Driving Forward High Pressure Centrifugal Fan Lime Kiln Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. Fan inlet shall be aerodynamic design round curved section to transit the air to the wheel cone smoothly, it shall have good commutated effect to reduce turbulence, improve fan efficiency and reduce noise. Detail introduction The wheel has a stable

Lime Rotary Kiln High Pressure Centrifugal Fan Wear Resistant Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. The fan housing shall be made in steel and its thickness and strength should be able to withstand the maximum running weight of the fan. The volute shall be continuously welded and equipped with access door for removing possible foreign objects

Forward Coupling Driving Low Pressure Explosion Proof Centrifugal Blower Product Features 1. When the pressure requirement is met, a large gas flow can be output, and the noise is very low. 2. The V-belt drive makes your fan to operate at the optimum speed. Installation is simple and does not require the support of professional technicians. 3. The airflow channel and the impeller are optimized several times, which is more efficient and energy-saving than ordinary large-flow

HG785 Alloyed Steel High Pressure Centrifugal Fan Induced Draft Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. The impeller is made of 12 sloped wing beveled blades, arc-conical front plate and flat-shaped rear plate welded together. The material is made of heat-resistant stainless steel. Impeller dynamic and static balance and overspeed test. Detail