| Place of Origin: | Henan China |
|---|---|
| Brand Name: | SIMO |
| Certification: | CE, ISO9001:2008,TUV |
| Model Number: | SIMO Blower 10-06 |
| Minimum Order Quantity: | 1 Set |
| Price: | 300-5000 USD |
| Packaging Details: | Export Wooden Case Packing, Steel pallet Packing |
| Delivery Time: | 15-35 Days |
| Payment Terms: | T/T, L/C, Payment Term Is Negotiable |
| Supply Ability: | 500 Sets Per Month |
| Electric Current Type: | AC | Drivetrain: | Coupling Driven |
|---|---|---|---|
| After-sales Service Provided: | Field Installation, Commissioning And Training | Bearing: | SKF/FAG/By Your Demand |
| Motor: | SIEMENS/ABB/By Your Demand | Delivery Time: | 30 Days |
| High Light: | stainless steel centrifugal blower,impeller centrifugal fan |
||
Foundry Furnace Silencer Carbon Structural Stainless Steel Air Blower Fan
Introduction
The 10-06 series high-pressure centrifugal fan is a new product developed by QingHua University for blowing coal powder into the boiler.
This series of products has the advantages of high efficiency, wear resistance, flat performance curve, wide efficiency range, low price, etc.
Small fertilizer plant production support, can also be used in high-pressure forced ventilation of iron furnace, burning furnace, positive pressure oil burner and material, grain conveying or conveying air and non-corrosive, non-self-igniting, non-explosive, non-volatile, non-sticky gas.
The temperature of the transport medium generally isn’t more than 80 °C. The dust and hard fine particles contained in the medium are not more than 150 mg/m3.
Centrifugal fan is applied in industrial boiler, (centrifugal fan can be applied in industrial boiler,) it also can be applied in industrial kilns, blast furnace, Industrial waste heat recovery device, Electrolytic aluminium production line air purification system and other industrial work environment.
According to fan parameters you need, SIMO can make centrifugal blower fan technical solution for you. So please provide air capacity, pressure range, medium temperature, voltage and other requirements, more details will help us design suitable technical solution for you.
Technical data
|
PRODUCT PARAMETERS
|
|||
|
Blower Fan
Application
|
Temperature | Normal temperature air, Hot air | |
| Air composition | Clean air, Dusty air, Corrosive gas, Combustible gas,Powder materials, Light particle materials | ||
|
Blower Fan
Performance
|
Impeller diameter |
400-2500 |
mm |
| Speed of mainshaft |
≤4000 |
rpm | |
| Pressure range |
4334-10628 |
Pa | |
| Flow range |
852-88814 |
m3/h | |
|
Blower Fan
Structure
|
Blade |
Forward |
|
| Impeller support | SWSI (Single Width, Single Inlet), Impeller overhung. | ||
| Drivetrain |
Coupling |
Can assign | |
| Lubrication | Oil bath lubrication | ||
| Bearing cooling | Air cooling, Water cooling, Oil cooling | ||
|
Blower Fan
System
configuration |
Motor | ABB, SIEMENS, WEG, TECO, SIMO, Chinese brand… |
Can assign |
| Impeller | Q235, Q345, SS304, SS316, HG785, DB685... | ||
|
Casing, Air inlet cone, Air inlet damper |
Q235, Q345, SS304, SS316, HG785, DB685... | ||
| Main shaft | 45# steel(High-strength carbon structural steel), 42CrMo, Stainless steel... | ||
| Bearing | FAG, SKF, NSK, ZWZ… | ||
|
Blower Fan
Optional
components |
System base frame, Protective screening,Silencer, Inlet & Outlet pipeline compensator, Inlet & Outlet flange, Damper, Electric actuator, Shock isolator, Diaphragm coupling, Fluid coupling, Motor rain cover, Temperature sensor, Vibrating sensor, Soft starter, Inverter, Special Electrical Motor,System monitoring Instrument, Lube system, Overhead lube tank etc. |
||
Advantages and Features
1.There are 12 long and short blades on the impeller, all of which are forward curved leaves. After the impeller is formed, it is corrected by static and dynamic balance, and the operation is stable and reliable.
2. The casing is welded into a snail shell by a common steel plate.
3. The air inlet cone is made into a convergent streamlined overall structure, which is fixed with the front cover plate by bolts.
4. The transmission group is composed of shaft, bearing box, coupling, etc. The main shaft is made of high quality steel. The bearing box is the overall structure, using rolling bearings, rolling bearings with mechanical oil lubrication.
5.The common base is welded with carbon steel plate and section steel.
FAQ
1. What parameters need to be provided when you design the industrial centrifugal fans?
Answers: Air flow, total pressure or static pressure, inlet temperature, local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the medium, please also inform the designer.
2. How about your company’s pre-sales service and after-sales service?
Answers: Before our cooperation, we have the professional technical team to help you make the technical solution according to your working condition, to make sure the centrifugal fan efficiency operation.
After sales service, we will offer 12 months’ repairing service, and provide lifelong follow-up services. Besides, our engineers are available for going abroad to offer the repairing service.
3. Does your company have qualifications?
Answers: SIMO Blower has obtained ISO 9001-2008, CE, BV certifications and so on.
