Exhaust Centrifugal Ventilation Fans Boiler Blower 3 Phase Single Suction

Single Suction Industrial Boiler Exhaust Centrifugal Ventilation Fans

Introduction

The Single Suction Industrial Boiler Exhaust Centrifugal Ventilation Fans is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas.

The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in the medium are not more than 150 mg/m3.

The Centrifugal Ventilation Fan can output higher gas pressure, and can provide more gas flow at the same time, low noise.In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians.The motor shaft is elastically connected with the drive shaft. It is not necessary to tighten the belt or replace the belt frequently, and the maintenance workload is small.The fan system running at normal temperature with an impeller diameter of less than 1400 mm does not require additional configuration of bearing cooling device, which reduces the user's investment and maintenance workload.

Technical data
 

                                                                                                                                                                                 
Advantages and Features   

1. When the airflow resistance is increased, the motor load will be automatically reduced and the motor will not be burnt.

2.The centrifugal ventilation fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.

3.Running test and vibration value detection after the production is completed, the fan operation is reliable.