"single inlet centrifugal fan"

Industrial Boiler Waste Gas Desulfurization Heavy Duty Centrifugal Fan Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 C, the V-belt driving type fan can transport media below 150 C for a long

Single Inlet Industrial Boiler Forced Draft Explosion Proof Centrifugal Blower Introduction The High Air Flow Coal-Fired Boiler Explosion Proof Centrifugal Blower Fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation

Single Inlet High Temperature Fluidized Bed Boiler Centrifugal Flow Fan Introduction This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. It can be used for more than four years when the concentration of impurities is less than 200 mg/m3. If it contains a lot of impurities, it also can be used, but it will shorten the

Industrial Boiler Primary Air Stainless Steel Heavy Duty Centrifugal Fan Introduction The 4-09 series large-flow centrifugal fan is suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous substances are allowed inside the gas, and the dust and hard particles

Alloy Steel Single Inlet Long Lifetime Centrifugal Ventilation Fans Air Supply Introduction The 4-10 series centrifugal Fan can be used for indoor ventilation in general factories and large buildings. No viscous substances are allowed in the gas, and the dust and hard particles contained in the gas are not more than 150 mg/m3. The gas temperature does not exceed 80C, and similar gas properties are also available. Detail introduction Mainly to meet the dust emission

Aluminium Alloyed Single Inlet Large Capacity Exhaust Centrifugal Flow Fan Introduction The 4-16 series centrifugal Fan can be used for indoor ventilation in general factories and large buildings. It can be used as both an input gas and an output gas. The type of gas transported is air and other non-self-igniting, non-self-explosive, non-surrounding, harmless to the human body and is non-corrosive to steel materials. It can also be made into explosion-proof and flame

Single Inlet Efficient Energy-Saving Sintering Machine Centrifugal Flow Fan Introduction The Single Inlet Efficient Energy-Saving Sintering Machine Centrifugal Flow Fan is suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous substances are allowed inside the

Large Capacity Single Suction Flue Gas Centrifugal Blower Fan Introduction The Large Capacity Single Suction Flue Gas Centrifugal Blower Fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, the Flue Gas Centrifugal Blower Fan can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of Flue Gas Centrifugal Blower Fan can also be used for dust removal, mine ventilation and

Single Inlet Stainless Steel Exhaust Flue Gas Centrifugal Blower Fan Introduction Single Inlet Stainless Steel Exhaust Flue Gas Centrifugal Blower Fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow