"power plant blower"

Double Suction Industrial High Temperature Medium Pressure Boiler Fan Introduction Of Centrifugal Fan This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type

High Air Flow Energy Efficiency Kilns Cooling Dust Collector Fan Detail introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering

Materials Drying Main Shaft Alternating Current Centrifugal Ventilation Fans Detail introduction : The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances

Single Suction Energy Saving Backward Curved Cooling Industrial Centrifugal Fans Introduction Of Centrifugal Fan The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and induced

16Mn Backward Curved Materials Drying Industrial Centrifugal Fans Introduction Of Centrifugal Fan 1.This series of fans is a new type of high efficiency industrial fan in the field of small flow and medium pressure. 2.The current collector and impeller front plate are processed by advanced spinning process and ensure precision. 3. V-belt driving and coupling driving type fan are equipped with integral bearing box, which has good lubrication, stable operation and long bearing

Q235 Single Inlet Forward Materials Drying Industrial Centrifugal Fans Introduction Of Centrifugal Fan The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. Suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other

Double Inlet Backward Curved Furnace High Pressure Centrifugal Fan Introduction Of Centrifugal Fan Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the sanitary standards for industrial enterprises, and can also be used in various occasions with the same functional requirements. Technical data series

Stainless Steel Energy Saving Coal Mill High Pressure Centrifugal Fan Introduction Of Centrifugal Fan 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris

High Temperature High Air Flow Gas Delivery High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 7-08.26 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. This series of fans is a new type of high efficiency industrial fan in the field of small flow and medium pressure. The current collector