"large centrifugal fan"

Explosion Protection Biomass Boiler Air Supply Centrifugal Power Plant Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the sanitary standards for industrial enterprises, and can also be used in various occasions with the same functional requirements. Centrifugal fan is widely used in

Aluminium Alloyed Energy Efficiency Smelting Furnace Centrifugal Flow Fan Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3.

Stainless Steel Energy Saving Backward Curved CFB Boiler Induced Draft Fan Introduction Of Centrifugal Fan They can transport clean gas, dusty gas, flammable gas, corrosive gas, powder or granular materials at normal temperature or high temperature. Typical applications include: building ventilation, mine ventilation, smoke evacuation, drying, clinker cooling, transport of gas, transport of lightweight materials, blasting and drafting of industrial boiler systems, and supply

Large Capacity Aluminium Alloyed Cooling Industrial Centrifugal Fans Introduction Of Centrifugal Fan The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. No viscous substances are allowed inside the gas, and the dust and hard particles contained in the gas are larger than 150 mg/m3, and the gas temperature does not exceed 80C. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air

Stainless Steel Medium Pressure High Wear Resistance Induced Draft Fan Introduction Of Centrifugal Fan 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The fan has high efficiency, high total pressure, low noise, flat performance curve, wide economical use area, and adopts backward plate type blades. The efficiency of the

Stainless Steel Forward Anti-Explosion Industrial Kilns Dust Collector Fan Introduction Of Centrifugal Fan The 7-03 series medium pressure collector fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. The current collector is equipped with a mounting flange to facilitate the use of the pipeline by the customer. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or

Alloy Steel Single Inlet Long Lifetime Centrifugal Ventilation Fans Air Supply Introduction The 4-10 series centrifugal Fan can be used for indoor ventilation in general factories and large buildings. No viscous substances are allowed in the gas, and the dust and hard particles contained in the gas are not more than 150 mg/m3. The gas temperature does not exceed 80C, and similar gas properties are also available. Detail introduction Mainly to meet the dust emission

16Mn Heavy Duty Heat Dissipation Power Plant Fan Large Capacity Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Stainless steel centrifugal fan can transport corrosive gases containing acid and alkali components and chemical components. According to customer needs customized

AC Motor Large Capacity Power Plant Fan Energy Saving Kilns Cooling Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Conveying medium chlorinated tail gas, high concentration of organic matter, using large air volume, high pressure explosion-proof centrifugal fan, coupling