"large centrifugal blower"

Medium Pressure Forward Heavy Duty Exhaust Fan Power Plant Fan Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. This can use different speeds to meet the requirements of various dust collectors in

Aluminium Alloyed High Air Flow Air Supply Cement Fan Metallurgy Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It is suitable for conveying non-corrosive high temperature gas with the temperature not exceeding 500. If the dust content of the gas is large, the dust removal device with the dust removal efficiency not less than 85% should be equipped before the air inlet of the fan to improve the service

V-Belt Driven High Temperature High Wear Resistance Induced Draft Fan Introduction Of Centrifugal Fan 1. The variable inlet damper can be used to flexibly adjust the pressure and flow of the fan during operation. The variable frequency motor can also be selected to adjust the pressure and flow of the fan by changing the speed. 2. The fan is equipped with temperature and vibration sensors, which can easily install the fan operation monitoring device. 3. Made of high quality

200kw Abrasion Resistant Heavy Duty Induced Draft Fan for Power Plants Introduction This 200kW Abrasion-Resistant Heavy-Duty Induced Draft (ID) Fan is engineered for the rigorous demands of power plant operations. It is specifically designed to handle large volumes of high-temperature, abrasive flue gases containing fly ash and particulate matter. Constructed with wear-resistant alloys and protective linings in critical areas, the fan ensures extended service life, operationa

ID fan for power plant up to 200MW urea fertilizer ID PA FD fan and FGD boost fan In energy sector we can provide blower and fan for both trandition and renewable energy generation. In a tradition power plant or captive power plant, we provide - Primary air fan (PA Fan); - Forced draught fan (FD Fan); - Induced draught fan (ID Fan); - FGD boost fan; Our blower and fan have been widely applied for the boilers with a capacity from 50 to 2000 t/h or power plant up to 600MW a

Q235 Energy Efficiency Antiwear Heat Dissipation Boiler Blower Fan Introduction The 6-06.51 series boiler fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The medium transported by the forced draft fan is air

Energy Efficiency Anti Abrasive Foundry Furnace Induced Draft Centrifugal Fan Introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Technical data series model

AC Motor Medium Pressure Anticorrosion Induced Draft Centrifugal Fan Introduction Of Centrifugal Fan Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 C, the V-belt driving type fan can transport media below

High Volume High Temperature Energy Saving Metallurgy Dust Collector Fan Introduction The 9-10.28 series dust extractor fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. The dust collector exhaust fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements. When the airflow resistance is increased, the motor load will be