"industrial centrifugal blower"

Q235 Energy Saving Industrial Centrifugal Fans Heat Dissipation Introduction 4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants.It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the

HG785 Alloyed Steel Heavy Duty Centrifugal Ventilation Fans Materials Drying Introduction The 4-10 series centrifugal Fan can be used for indoor ventilation in general factories and large buildings. The casing is welded into a cochlear body by steel plates.The casing is welded into a cochlear body by steel plates. Detail introduction The transmission group is composed of a main shaft, a belt wheel and a water-cooled bearing box. The housing is welded into a cochlear body with

Q345 Coupling Driving Foundry Furnace Antiwear Dust Collector Fan Introduction The Q345 Coupling Driving Foundry Furnace Antiwear Dust Collector Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving product jointly

Product Description The 422kW Q345 High-Strength Low-Alloy Steel Sintering Blower & Induced Draft Fan is built for high-temperature and heavy-duty applications. Made with wear-resistant Q345 steel, it ensures high structural strength and long service life. Ideal for sintering systems in metallurgy, building materials, and other industrial sectors. Specification Series no. 5-12series Feature selection Normal anti-corrosion wear-resisting High temperature anti-explosion

Corrosion Resistant Industrial Centrifugal Building Ventilate Fan Introduction Corrosion Resistant Industrial Centrifugal Building Ventilate Fan can be used to input gas as well as to output gas. The gas delivered by the 4-14 series industrial centrifugal fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the gas, and the dust and

3000 Cfm Oven Wall Cooling Stainless Steel Centrifugal Blower Introduction The fans are commonly used in large-scale industrial systems such as large dust removal systems, industrial desulfurization and denitrification, large industrial boiler systems, large industrial rotary kilns and calcining kiln systems, and mineral powder sintering (sintering machines) and so on. The fans are commonly used in large-scale industrial systems such as large dust removal systems, industrial

Alloy Steel High Air Flow Industrial Boiler SA Centrifugal Flow Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more

Aluminium Alloyed V-Belt Driven Smelting Furnace Centrifugal Ventilation Fans Introduction 1.It can output higher outlet pressure and provide more gas flow at the same time, low noise. Stable operation at higher media temperatures. 2. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. 3. Motor slide guide can be provided for convenient belt tensioning to reduce energy loss

Carbon Steel High Temperature Industrial Centrifugal Fans Air Supply Introduction The 7-03 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. The fan adopts advanced technology. The design of backward curved centrifugal wheel is optimized by means of CFD hydro-field simulating. The design is more accordant with the aerodynamic characteristics, high efficiency, and stable airflow. Technical data