"induced draft blower"

Medium Pressure Single Inlet Brick Kiln Induced Draft Centrifugal Fan Introduction 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. The output gas flow is slightly larger than the 6-11 series heavy-duty centrifugal fan, the air volume is large, and the pressure is high, smooth operation, high reliability and long life. It is widely used in industrial

High Temperature Stainless Steel Biomass Boiler Centrifugal Fan Introduction This series of id fan in boiler can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. It is capable of outputting a higher outlet pressure while providing more gas flow with lower noise. Stable operation at higher media temperatures.The performance of the fan is

Heavy Duty High Temperature Backward Cement Kiln Centrifugal Fan Introduction 1.The fan pressure is high, therefore it is especially suitable for 1-20t/h industrial boilers, which equipped with spiral pipes and multi-tube dust collector. 2.The induced draft fan is made into a single suction, different impeller diameter from 400mm to 3000mm. 3.The position of the air outlet of the fan is expressed by the angle of the air outlet of the casing."Left" and "Right" can be made into

V-Belt Driven Medium Pressure Backward Cooling Centrifugal Flow Fan Introduction The 5-12 series centrifugal fan air flow is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. The impeller is subjected to a high standard of dynamic balance

Stainless Steel Single Inlet Energy Saving Furnace Dust Collector Fan Introduction G4-10 and Y4-10 series dust extractor fan are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks. There are a variety of accessories to choose from. Technical data series model Rotation Speed

Low Pressure High Air Flow Backward Curved Dust Collector Fan Introduction G4-10 and series collector fan are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the pressure and flow of the fan by changing the speed. Fan systems with impeller diameters

HG785 Alloyed Steel V-Belt Driven Explosionproof Dust Collector Fan Introduction G4-10 and series dust suction fan are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. The fan blade placement angle is optimized, more wear-resistant and longer service life. Motor sliding guides are provided for easy tensioning of the belt to reduce energy loss due to belt slack. Technical data series model Rotation Speed (r/min)

Industrial Long Life Blast Furnace Boiler Fan Explosion Proofing Introduction This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type transmission. Detail introduction

China Coupling Driven Anti-Explosion Centrifugal Flow Fan Introduction The fan pressure is high, therefore it is especially suitable for 1-20t/h industrial boilers, which equipped with spiral pipes and multi-tube dust collector.The induced draft fan is made into a single suction, different impeller diameter from 400mm to 3000mm.The position of the air outlet of the fan is expressed by the angle of the air outlet of the casing."Left" and "Right" can be made into different