"high temperature fans and blowers"

Q345 Coupling Driving Foundry Furnace Antiwear Dust Collector Fan Introduction The Q345 Coupling Driving Foundry Furnace Antiwear Dust Collector Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving product jointly

Carbon Steel High Temperature Materials Cooling Flue Gas Centrifugal Blower Fan Introduction 1. It can output higher outlet pressure and provide more gas flow at the same time, low noise. 2. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. 3. Motor slide guide can be provided for convenient belt tensioning to reduce energy loss caused by belt slack. 4. The bearing housing

High Temperature Industrial Kilns Stainless Steel Centrifugal Blower Introduction Of Centrifugal Fan The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler,

Alloy Steel 80KW High Temperature Air Supply Industrial Centrifugal Fans Introduction Of Centrifugal Fan 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. The output gas flow is slightly larger than the 6-11 series heavy-duty centrifugal fan, the air volume is large, and the pressure is high, smooth operation, high reliability and long life. Technical

Aluminium Alloyed High Temperature Oven Wall Cooling High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling,

Single Inlet High Temperature Fluidized Bed Boiler Centrifugal Flow Fan Introduction This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. It can be used for more than four years when the concentration of impurities is less than 200 mg/m3. If it contains a lot of impurities, it also can be used, but it will shorten the

Stainless Steel High Temperature Forward Material Handling Blower Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. The airflow channel and the impeller are optimized several times, which is more

High Pressure High Temperature Materials Cooling Centrifugal Ventilation Fans Introduction The High Pressure High Temperature Materials Cooling Centrifugal Ventilation Fans can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement

High Temperature Materials Cooling Energy Saving Heavy Duty Centrifugal Fan Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. High Temperature Materials Cooling Energy Saving Heavy Duty Centrifugal Fan can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc.