"high temperature air blower"

Cement Industrial Boiler Induced Draft Centrifugal Blower Fan Introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. Centrifugal fan is applied in industrial boiler, (centrifugal fan can be applied in industrial boiler,) it also can be applied in industrial kilns, blast furnace, Industrial

Industrial Dust Collector High Pressure Blower Centrifugal Fan Introduction The 9-11 series centrifugal fan has a large flow rate and moderate pressure. This centrifugal fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The centrifugal fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving product jointly designed by the

High Temperature Industrial Boiler FD Flue Gas Centrifugal Blower Fan Introduction The High Temperature Industrial Boiler FD Flue Gas Centrifugal Blower Fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the High Temperature Industrial Boiler FD Flue Gas Centrifugal Blower Fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful

High Quality Exhaust Air Blower Stainless Steel Flue Gas Fan Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty gas,

Y9-19 Boiler Induced Draft Fan Introduction Of Y9-19 blower fan Product Description: 9-19, 9-26 High-Pressure Centrifugal Ventilator The model 9-19 high-pressure centrifugal ventilator has the advantages of high efficiency, low noise, flat performance curve, and wide areas of high efficiency compared with the same type of ventilator at home and abroad. Scope of application: Generally speaking, the ventilator is used for forging furnaces and high-pressure forced ventilation,

High Pressure Centrifugal Fan 380v/220v/440v/10kv Stainless Steel 201/304/316/316L Product Description: High Pressure Centrifugal Fan is designed to provide reliable and powerful air movement and pressure for industrial applications. This fan features a frequency conversion/explosion proof motor, and is available with a range of voltage options such as 380v/220v/440v/10kv. The fan is capable of producing high pressure air flow and has been carefully designed to provide

Coal-Fired Boiler Wear Resistant Cement Centrifugal Blower Fan Introduction The temperature of the medium is generally not more than 80C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3. The Coal-Fired Boiler Wear Resistant Cement Centrifugal Blower Fan can also be used in cement kiln decomposition process, steel smelting and other special occasions use of high temperature fan (use heat resistant & high strength material). According to

Materials Drying Large Capacity Foundry Furnace Cement Ventilate Blower Fan Introduction The 6-06 series dust exhaust centrifugal fan has the characteristics of low dust accumulation and wear resistant. The Materials Drying Large Capacity Foundry Furnace Cement Ventilate Blower Fan is suitable for discharging gas containing dust, wood chips and finely divided fibers (If it contains hard particles, a dust removal device must be installed in front of the fan.), it can also be

Q235 Energy Efficiency Stainless Steel Cement Exhaust Air Supply Fan Introduction The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. The Q235 Energy Efficiency Stainless Steel Cement Exhaust Air Supply Fan has stable and high performance and is widely used in environmental dust removal, material