"high pressure centrifugal blower"

Corrosion Resistant Industrial Centrifugal Building Ventilate Fan Introduction Corrosion Resistant Industrial Centrifugal Building Ventilate Fan can be used to input gas as well as to output gas. The gas delivered by the 4-14 series industrial centrifugal fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the gas, and the dust and

Low Pressure High Air Flow Explosionproof Industrial Boiler ID Industrial Centrifugal Fans Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous

China Coupling Driven Anti-Explosion Centrifugal Flow Fan Introduction The fan pressure is high, therefore it is especially suitable for 1-20t/h industrial boilers, which equipped with spiral pipes and multi-tube dust collector.The induced draft fan is made into a single suction, different impeller diameter from 400mm to 3000mm.The position of the air outlet of the fan is expressed by the angle of the air outlet of the casing."Left" and "Right" can be made into different

Long Life Forward Alloy Steel Oven Wall Cooling Centrifugal Flow Fan Introduction 1. Fan systems with impeller diameters less than 1400 mm at normal temperature do not require additional bearing cooling devices, reducing users investment and maintenance. 2. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks. 3. The weld of the impeller and the main shaft are ultrasonic flaw

Q235 Coupling Driving Backward Explosion Proof Blower Centrifugal Fan Product Features G4-14 and Y4-14 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean

Double Suction Industrial High Temperature Medium Pressure Boiler Fan Introduction Of Centrifugal Fan This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type

Large Capacity Long Life Coal Injection Boiler Fan Energy Efficiency Introduction 5-12 series high temperature fan is suitable for conveying high temperature gas without corrosion, spontaneous combustion and temperature not exceeding 70O. If the dust content of the gas is large, dust removal device with dust removal efficiency not less than 85% should be equipped before the air inlet of the fan to improve the service life of the fan. Where the intake conditions are

16Mn AC Motor Industrial Centrifugal Fans Heat Dissipation Long Life Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. The new shaft and coupling technology ensuring the accuracy during the assembly process while maintaining high reliability. All our machines underwent

Large Capacity Air Supply Of Industrial Kilns Centrifugal Fan Introduction The Large Capacity Air Supply Of Industrial Kilns Centrifugal Fan has moderate pressure and large flow, belongs to the low noise series fan and has stable performance. Its suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. For dust-containing gas, we can meet