"general ventilation fan"

AC Motor Backward Curved Anti Abrasive Induced Draught Cement Fan Blower Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed

Low Pressure High Air Flow Explosionproof Industrial Boiler ID Industrial Centrifugal Fans Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous

High Temperature Resistant Stainless Steel first forced draft boiler fan mine ventilation centrifugal fan Series Model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m/h) Power (kW) 5-05 2.5A~6.5A 1420~2825 907~1313 599~11053 0.75~5.5 4C~10C 1600~2900 1232~3867 3007~44413 3~45 8D~12.4D 1450 1989~4051 12028~76740 15~90 5-06 8F~31.5F 480~1450 1358~9828 9890~709000 15~2000 5-11 4C~9C 1740~2900 990~3197 2750~36140 3~37 12D~12.4D 1450 2471~3903 37100~75330 75~90 5-12 4C

V-Belt Driven Low Pressure Long Lifetime Alloy Steel Induced Draft Fan Introduction: The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It has large flow and low noise, more use in building ventilation, ventilation and drying of materials, air purification and industrial waste gas treatment, industrial dust collectors, air purification and discharge in hazardous working environments(Paper production line, electrolytic

Thermal Power Duct Flange System Base Extractor Ventilating Centrifugal Fan Introduction Of Centrifugal Fan Centrifugal fan is a kind of machinery that relies on input mechanical energy to increase gas pressure and discharge gas. The basic composition of a centrifugal fan: a rotating impeller and a volute casing. The function of the rotating impeller is to obtain energy from the air; the function of the volute is to collect air and effectively convert the dynamic pressure of

Stainless Steel Long Life Industrial Air Supply Flue Gas Fan Introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating fluidized bed

AC Motor High Air Flow Building Ventilation Material Handling Blower Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in

Single Inlet Abrasion Proof Lime Kiln Heavy Duty Centrifugal Fans Detail introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3.

High Temperature Stainless Steel Energy Efficiency Centrifugal Fan Introduction The 9-08 series high pressure centrifugal fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are